Tyan Transport GT14 B2933 Server

TYAN Updated: 2009-01-31 RSS
Tyan Transport GT14 B2933 Server

A versatile entry level server platform, the GT14 (B2933), offers excellent features.  A short rack supporting (2) AMD Rev F Opteron 2000 series processors, (8) DDR2 DIMMs up to 32 GB DDR2 registered memory, (1) nVIDIA nForce Pro 3600 chipset, (1) PCI-Express x 16 slot, and (4) SATA2 connector supporting RAID 0, 1.  In addition of LCM and HDD tray packed into a flexible form factor, the GT14 (B2933) is the absolute solution for network infrastructure development and front-end serving needs.

Motherboard

Motherboard
- TYAN Thunder n3600S (S2933G2NR)
- 10.4" x 9.4" (265mm x 240mm); 8 layer PCB

Processor
- Dual 1207-pin ZIF Socket
- Support up to 2 AMD® F Opteron™ 2000 series Dual Core/ Quad Core processors
- Up to 1.0GHz Hyper-Transport link support

Chipset
- nVIDIA nForce Pro 3600 chipset
- SMSC DME5017

Memory
- 128-bit dual channel memory bus
- (8x) 240-pin DDR2 DIMM sockets
- Support memory speeds of 400/533/677/800 MHz
- Supports up to 64GB of Reg/ECC DDR2 memory
- Supports Single, Dual and Quad Rank memory

Expansion Slots
- (1) PCI-E x16 slot (with x16 signal)

Integrated Video
- XGI Volari Z7 (XG20)
- 16MB frame buffer of video memory

System Management
- SMSC SCH5017 with 2x EMC6D103
- (8) 4-pin system fan headers, with tachometer input and auto fan control
- Temperature and voltage monitoring
- Watchdog timer support
- Port 80 code display LED

Server Management (optional)
- TYAN M3291, IPMI 2.0 (2 x 25-pin) Remote System Management Card.
- Renesas H8S2167 BMC controller
- BT, KCS, Logging support
- IPMI-over-LAN
- Remote power on/off and reset
- Support TSM and LCM module

Integrated LAN Controller
- (2) NFP3600 integrated MAC with two Marvell 88E11116 single port GbE PHY: Integrated TCP offload Engine (TOE); IEEE802.3 compliant, WOL/PXE support; Pin header for front panel LAN LED

BIOS
- AMI BIOS on 8Mbit LPC Flash ROM
- Serial Console Redirect
- USB boot supported
- ACPI 2.0 supported
- PnP, DMI2.0 WfM2.0 Power management

Chassis

Enclosure
- Industry 19" rack-mountable 1U chassis
- Dimension: With Bezel - 15.5" (D) x 17.2" (W) x 1.7" (H);394 (D) x 436 (W) x 43.7 (H) [mm];W/O Bezel - 14.4" (D) x 17.2" (W) x 1.7" (H);365 (D) x 436 (W) x 43.7 (H) [mm]

Power Supply
- EPS 12V, 1U, 400W PS (24 pin + 8 pin + 4 pin)
- 100V ~ 240V AC input

Back I/O Ports
- PS/2 Mouse and Keyboard ports (stacked)
- (2) USB 2.0 ports (stacked)
- (1) 9-pin COM port
- (1) 15-pin VGA port
- (2) RJ45 GbE LAN ports

Front Panel Features
- I/O: (2) USB 2.0 ports
- LED indicators: HDD Active, power, (2) LAN, ID, & warning LEDs
- Switch: power, ID
- LCM module

Integrated Serial ATA II Controller
- Up to (4) serial ATA ports running at 3.0Gb/s
- Serial ATA II specification compliant
- nVidia Media Shield™ RAID supports for RAID 0, 1, 0+1, 5 and JBOD

Storage Drives
- Hard Disk Drives: (1) 3.5" HDD + (1) 2.5" HDD;(2) 3.5" HDD (without PCI-E support);(3) 2.5" HDD (option);(4) 2.5 HDD (without PCI-E support) (option)

System Cooling
- (4) 4028 fans
- (1) Passive CPU heatsink