Tyan Tank GT25 B5381 Server

TYAN Updated: 2009-01-31 RSS
Tyan Tank GT25 B5381 Server

With the capability to meet mission-critical requirements, the Tank GT25 (B5381) will add value and performance to any IT rackmount environment. Using a 1U rackmount form factor, the Tank GT25 supports a 650W redundant 1+1 or 650W single PFC power supply, dual Intel® Xeon® 5000/5100/5300 processors support, (12) FBDIMM memory sockets, SATA or SAS hot-swap drive support, dual Gigabit Ethernet ports, PCI-X and PCI Express expansion port options and much more.

Motherboard Features:

Motherboard
- TYAN S5381WG2NR 1U
- Customized 15"x16", (381x406mm)

Processor
- Dual LGA771 sockets
- Up to two Intel® Xeon® 5000/5100/5300 series (1066Mhz/1333MHz FSB) processors: Dual-Core

Chipset
- Intel® 5000P Memory Controller Hub (MCH)
- Intel® ESB2-E I/O Controller Hub
- Winbond W83627EHG Super I/O chip
- ADT7463 Hardware Monitoring IC (on fan board)

Memory
- (12) dual ranked FBDIMM (Fully-Buffered) sockets
- Four memory channels; supports ECC memory
- Supports max. 48GB of DDR2 533/667 mem.

Expansion
- Aligned (1) 64-bit/133MHz PCI-X slot and (1) x8 PCI-E slot, supporting (1) full height/full length add-on PCI-X(M2055) or PCI-E(M2082) card
- Aligned (1) 64-bit/133MHz PCI-X slot and (1) x8 PCI-E slot, supporting (1) low-profile PCI-X (M2057) or PCI-E(M2086) add on card
- 2 usable expansion slots

Integrated Storage Controller
- B5381G25V4H: embedded 4-port SATA 1.0 from ESB2-E - Supports four SATA 1.0 HDDs running at 1.5Gb/s
- B5381G25W4H/R: integrated SAS controller - Supports SATA 2.0/SAS ports running at 3.0GB/s
- LSI 1068E SAS controller
- (8) SAS ports; RAID 0, 1, and 1E supported
- Supports Integrated Mirroring, Integrated Enhanced Mirroring, and Integrated Striping

Networking
- Intel® 82563 GbE PHY supports dual GbE ports

Server Management
- System fan speed monitoring and control
- Support Tyan Server Management (TSM)
- Optional TYAN SMDC Kit, IPMI 2.0 compliant
- Chassis intrusion alert

BIOS
- Phoenix 8Mbit LPC Flash ROM
- Supports ACPI 2.0 & APM 1.2
- PnP, DMI2.0, WfM2.0; Power Management
- Serial console redirect

Integrated PCI Graphics
- ATI ES1000 with 16MB frame buffer

Chassis Features:

Enclosure
- Industry 19" rack-mountable 1U chassis
- (1) slim line CD-ROM bay
- (4) 3.5" HDD bays
- Dimensions (inch): 17.2"(W) x 27.9"(D) x 1.71"(H)
- Dimensions (mm): 436 (W) x 708 (D) x 43.5 (H)

Power Supply
- Redundant EPS 12V, 1U, 650W (1+) for B5381G25W4HR and 650W single for B5381G25V4H / B5381G25W4H
- 100V~240V AC input

Front Panel Features
- I/O: (2) USB 2.0 ports
- Switch: Power, Reset, NMI, ID
- LED indicators: HDD active, System Warning, Power, LAN (2), ID

Back I/O Ports
- Stacked PS/2 Mouse and Keyboard ports
- (1) 9-pin UART Serial port
- (1) 15-pin VGA port
- (2) RJ-45 10/100/1000 ports, side-by-side
- (2) USB 2.0 ports side-by-side
- (1) 4-port SAS connector 9SSF-8470)

Cooling
- (7) 40x40x56mm 15000rpm heavy-duty fans
- (2) passive CPU heatsinks

Storage
- Pre-installed slim type DVD-ROM
- Hard Disk Drives support: B5381G25V4H: support (4) hot-swap SATA 1.0 HDD with RAID 0, 1, 5, 10; B5381G25W4H / R: support (4) hot-swap SATA2.0/SAS HDD with RAID 0, 1, 10