Mitsubishi VS-50XLW50U Rear Access Lamp Changer Projection Cube

Mitsubishi's VS-50XLW50U Projection Cube provides an automatic lamp changer for additional reliability for your mission critical command center display wall. In the event of a lamp failure or pre-determined degeneration of brightness, the VS-50XLW50U Projection Cube will automatically switch to a spare lamp already installed in the light engine. This high level of redundancy offers minimal downtime of the display wall cube, displaying an image just 7 seconds after initiating the lamp switch.

This product's high resolution 50" XGA cube is also designed for 24 hour, 7 day a week operation, ideal for command center applications. The VS-50XLW50U Projection Cube displays your data clearly with our durable DLP® engine.

Proprietary Mitsubishi features ensure that the VS-50XLW50U Projection Cube will maintain uniform brightness and color throughout the display wall. Mitsubishi's Dynamic Brightness Balancing™ feature monitors the brightness in each cube, adjusting each VS-50XLW50U Projection Cube individually as required to ensure equal brightness on the display wall. Smart Lamp™ and Smart Colorwheel™ maintain color uniformity throughout the command center display wall. Each lamp and color wheel stores its own color characteristics internally, and when either is replaced the function activates recalibrating the cube into perfect color balance with the display wall.

Installation and service time can be greatly reduced through the optional motorized adjustment tool. It allows remotely operated mechanical adjustments to the image geometry. This time-saving device enables a single technician to make the slightest adjustments to the 6-axis adjuster, creating precise image alignment between the display wall cubes.

Display
Display Technology: DLP® chip (0.7", 12° single chip)
Brightness: Bright: 1000 cd/m² (typical); 292 ft.-L (typical);
Normal: 800 cd/m² (typical); 234 ft.-L (typical)
Light Output: Bright: 700 ANSI Lumens; Normal: 560 ANSI Lumens
Native Resolution: 1024 x 768 pixels (XGA)
Screen Size: 50" diagonal viewable (1270 mm)
Contrast Ratio: 1600:1 (typical)
Pixel Clock Rate: 25 - 115 MHz
Viewing Angle: Horizontal: 160°; Vertical: 60°(typical)
Mullion Size: 0.2 mm - 1.0 mm (*)

Interface
RGB Input Scanning Frequency: VGA (640x480) - SXGA (1280x1024)
Horizontal: 31.5 - 78.0 kHz; Vertical: 49 - 85 Hz
Analog RGB Input Signal: 5 BNC (RGBHV) x1
Video: 0.7Vp-p positive/75 ohms;
Synchronous: TTL level (positive/negative),
High Level: 2.5-5.0V; Low Level: 0-0.5V;
Sync On Green: Video: 0.7Vp-p positive;
Synchronous: 0.3Vp-p negative
Digital RGB Input Signal: TMDS (DVI-D) x1
Control Signal Input: RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2
(input, output) Mitsubishi original control link;
Wired Remote: F3.5 Jack; IR Receiver

Lamp
Lamp Type: High pressure mercury lamp 100W/120W x 2
Lamp Life: 10,000 hours/6,000 hours

Physical
Weight: 136.7 lbs. (62 kg)
Dimensions (WxHxD): 40.0 x 38.7 x 21.1" (1016 x 982.5 x 535 mm)
Power Consumption: 195/195W
Voltage Range: AC 100-240V ±10%, 50/60Hz ±1 Hz
Thermal Dissipation: N/A

Other
Temperature and Humidity: Condition at Operation: 50-95°F; (10-35°C)
20-80% non-condensing
Condition at Storage: -4-122°F; (-20-50°C)
20-80% non-condensing
Safety Approval: UL60950, CSA22.2 No. 60950, EN60950, approved by UL
EMC: FCC Part 15 Class A, Industry Canada Class A
EN55022 Class A, EN55024, EN61000-3-2, EN61000-3-3