Tripp Lite SU40KX SmartOnline Modular 3-Phase UPS System

Tripp Lite Updated: 2009-01-25 RSS
Tripp Lite SU40KX SmartOnline Modular 3-Phase UPS System

Tripp Lite's SU40KX (40kVA) SmartOnline Modular 3-Phase Intelligent, True On-Line UPS System provides 100% system availability with N+1 modular architecture and 1+1 parallel capability. In N+1 configuration, the SU40KX provides two self-contained, redundant 20kVA power modules that can be hot-swapped (load remaining powered) if maintenance is required. In 1+1 configuration , two SU40KX models connected in parallel can provide fail-safe redundancy (two 40kVA models supporting a 40kVA load) or increased capacity (two 40kVA models supporting an 80kVA load).

The SU40KX provides mission-critical equipment with the highest level of power protection available. Large capacity 40,000VA/32,000W UPS continually converts incoming AC power into filtered DC power, and then resynthesizes it back into AC power with a pure sine wave. Perfectly regulated, continuous sine wave output with zero transfer time assures compatibility with all equipment types. High input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology produce less than 3% input total harmonic distortion (THDi). With low THDi, generators run cooler and last longer, allowing managers to save installation costs by installing a generator with a capacity equal to the equipment load (1:1 ratio). Extremely efficient operation (up to 97%) saves money by lowering electricity consumption. Hardwire input and output connections support a variety of permanent or PDU-style power connections. The SU40KX features 220/380V, 230/400V or 240/415V AC, 3-phase, 4-wire + ground, wye input and output. It also features a wide input voltage correction range: 173-300V/276-477V AC. Frequency is 50 or 60 Hz (auto-selectable). The SU40KX combines internal power and battery modules in a single small-footprint tower compartment. Typical half-load/full-load runtimes are 13 min./5.5 min. Battery runtime can be extended with optional stand-alone hardwired external battery modules (Models BP480V26B and BP480V40C, available separately). A manual bypass breaker and an automatic bypass function ensure 100% availability of connected equipment by safely passing through AC power if the UPS requires maintenance. A built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server. An accessory slot accepts an optional internal SNMP card (Model SNMPWEBCARD) for remote shutdowns, reboots and more. Front panel combination LCD/LED display alerts users to a variety of UPS operational modes and conditions. The LCD display includes a real-time event log screen with up to 500 events listed. A dynamic battery management screen optimizes battery function to lengthen service life and allow cold restart of the UPS during a prolonged blackout to utilize its batteries for periodic system access or data retrieval. An Emergency Power Off button turns the UPS output OFF and disables Bypass output. A built-in Emergency Power Off (EPO) dry-contact interface supports remote emergency shutdown in large facilities.

* N+1 configuration: If maintenance is required, two self-contained, redundant 20kVA power modules can be hot-swapped with the load remaining powered
* 1+1 configuration: Two SU40KX can be connected in parallel to provide either fail-safe redundancy or increased capacity
* High input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology produce low input total harmonic distortion (THDi)
* Low THDi (less than 3%) reduces installation costs by allowing 1:1 generator sizing
* Extremely efficient operation (up to 97%) saves money by reducing electricity consumption
* True on-line, double-conversion UPS with IGBT technology provides pure sine wave AC output at all times
* Maintains continuous operation with zero transfer time through blackouts, voltage fluctuations and surges
* Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
* 40,000VA/32,000W power capacity with 3-phase, hardwire input/output connections
* Wide input voltage correction range: 173-300V/276-477V AC
* Internal power and battery modules are combined in a single small-footprint tower compartment. Typical half-load/full-load runtimes are 13 min./5.5 min. Battery runtime can be extended with optional stand-alone hardwired external battery modules (Models BP480V26B and BP480V40C, available separately)
* Front panel combination LCD/LED display includes a real-time event log screen with up to 500 events listed
* Dynamic battery management screen optimizes battery function to lengthen service life and allow cold restart of the UPS
* Built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server
* Accessory slot accepts an optional internal SNMP card (Model SNMPWEBCARD) for remote shutdowns, reboots and more
* Emergency Power Off button turns UPS output OFF and disables Bypass output
* Built-in Emergency Power Off (EPO) dry-contact interface supports remote emergency shutdown in large facilities
* 2-year warranty
* Extended warranties and on-site service contracts available for select opportunities; contact Tripp Lite for details

Applications

* Ideal for protecting mission-critical equipment in computing, networking or telecommunications environments.

Package Includes

* SU40KX UPS System
* PowerAlert Software
* Instruction manual
* Warranty information