Tripp Lite SU10000RT3U2TF SmartOnline Rack UPS

Tripp Lite Updated: 2009-01-27 RSS
Tripp Lite SU10000RT3U2TF SmartOnline Rack UPS

10,000 VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 10 rack spaces (3U power module, 3U battery pack and two 2U step-down transformers). Maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP240V10RT3U external battery packs. Full-time sine wave 208V and 120V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; NEMA L6-30R, L6-20R and 5-15/20R output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LED/LCD display panel easily rotates for better viewing in rackmount or tower configurations. LCD panel with scroll buttons offers detailed diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM two post rackmount hardware accessories available. Field-replaceable, hot-swappable power module and external battery 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

* 10,000 VA on-line, double-conversion UPS system (high voltage input/high AND low voltage output)
* Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment
* Installs in only 10 rack spaces (3U power module, 3U battery pack, 2 x 2U step-down transformers) with a maximum installed depth of 32.5 inches
* Offers 4 min. runtime at full load (10,000VA/8000W) and 10 min. at half load (5000VA/4000W). Runtime is expandable with any number of optional BP240V10RT3U external battery packs
* Full-time sine wave 208V and simultaneous 120v +/-2% output
* Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output
* Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
* Standard 3-wire 208V hardwire input connection
* 2 NEMA L6-30R, 4 L6-20R and 24 5-15/20R output receptacles
* Detailed LCD panel with scroll buttons offers detailed diagnostic test
* Network-grade AC surge and noise suppression
* Zero transfer time between AC and battery operation
* Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port, and contact closure port for unattended shudown, remote control and monitoring of UPS system and power data
* Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling
* Emergency Power Off (EPO) interface
* Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status.
* Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
* 4-post rackmount and upright tower installation accessories included; 2POSTRMKITWM 2-post rackmount hardware accessories available
* Field-replaceable, hot-swappable power module and external battery packs
* Attractive all-black color scheme
* 2-year warranty; $250,000 connected equipment insurance
* Extended warranty and service contracts available

Applications

* Ideal for protection of sensitive electronics in any application calling for upright tower or 19-in. rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Package Includes

* 3U power module with detachable hot-swap PDU input/output panel and manaul bypass switch
* 3U external battery pack
* 2 x 2U step-down transformers
* Two sets of 4-post rackmount rails (one for each 3U component); one set of tower stands for upright tower installation
* PowerAlert Software, complete data cabling, user manual with warranty information