Tripp Lite SU10000RT3U SmartOnline Rack UPS

Tripp Lite Updated: 2009-01-27 RSS
Tripp Lite SU10000RT3U SmartOnline Rack UPS

10,000VA (10kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack spaces (3U power module and 3U battery pack); maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP240V10RT3U external battery packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without consuming battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; NEMA L6-30R and L6-20R output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs provide at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LED/LCD display panel rotates for better viewing in rackmount or tower configurations. Detailed LCD panel with scroll buttons provides detailed diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM 2-post rackmount hardware accessories available. Field-replaceable, hot-swappable power module and external battery packs. Attractive all-black color scheme. 2-year warranty; extended warranty and service contracts available. $250,000 connected equipment insurance

* 10,000VA (10kVA) on-line, double-conversion UPS system (high-voltage input/high-voltage output)
* Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment
* Installs in only 6 rack spaces (3U power module/3U battery pack) with a maximum installed depth of 32.5 in.
* Offers 4 min. runtime at full load (10,000VA/8000W) and 10 min. at half load (5000VA/4000W). Runtime is expandable with any number of optional BP240V10RT3U external battery packs
* Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output (user selectable)
* Actively converts raw incoming AC power to DC, then re-converts output to completely regulated, filtered AC output
* Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V
* Standard 3-wire 208V hardwire input connection
* 4 x NEMA L6-20R and 2 x NEMA L6-30R output receptacles
* Detailed LCD panel with scroll buttons provides detailed diagnostic test information on startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage, battery charge level and more
* Network-grade AC surge and noise suppression
* Zero transfer time between AC and battery operation
* Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port, and contact closure port for unattended shudown, remote control and monitoring of UPS system and power data
* Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling
* Emergency Power Off (EPO) interface
* Front panel LEDs provide at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status
* Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading
* 4-post rackmount and upright tower installation accessories included; 2POSTRMKITWM 2-post rackmount hardware accessories available
* Field-replaceable, hot-swappable power module and external battery packs
* Attractive all-black color scheme
* 2-year warranty; extended warranty and service contracts available
* $250,000 connected equipment insurance

Applications

* Ideal for protection of sensitive electronics in any application calling for upright tower or 19-in. rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Package Includes

* 3U power module with detachable hot-swap PDU input/output panel and bypass switch
* 3U external battery pack
* Two sets of 4-post rackmount rails (one for each of the 3U components)
* One set of tower stands for upright tower configuration
* PowerAlert Software, complete cabling, owner's manual with warranty information