JBL C608GTI MKII 2-Way Component Speaker System
JBL Updated: 2008-09-14 RSSThe woofer cone developed for the C608GTi MKII is anodized aluminum. This material moves the first-modal cone-body breakup to a high frequency outside the operating band, significantly reducing distortion and maximizing midrange clarity.
An optimized nitrobutylene (NBR) low-loss surround material is used to damp cone breakup modes.
A 2" aluminum edge-wound voice coil is used. Using this ribbon-shaped aluminum wire allows us to precisely specify the number of windings in the magnetic gap optimizing motor force for high efficiency and low distortion.
The tweeter featured in the C608GTi MKII system uses a pure titanium dome suspended by a rubber surround to optimize output and reduce distortions that travel along the tweeter's dome.
The C608GTi MKII utilizes an outboard crossover with a 3500Hz fouth-order Linkwitz-Riley acoustic alignment. Air-core inductors are used to reduce magnetic saturation under high-power conditions and polypropylene capacitors ensure near ideal characteristics with low equivelent series resistance (ESR). The crossover also features impedance compensation and a tweeter protection circuit. Tweeter level may be adjusted for flat response +2dB or -2dB.
The C608GTi MKII midrange/woofer cone also features Plus One (patent pending) technology, which provides up to 30% more cone area than competing speakers of the same size. Speaker with Plus One deliver higher efficiency and more bass output.
The Tweeter in the C608GTi MKII component system features the I-Mount (patent no. 5,859,9170) tweeter-mounting system. This system facilitates easy and versatile tweeter installation (surface, flush, or flush angled).
SPECIFICATIONS
General
Power Handling, RMS: 150 Watts
Power Handling, Peak: 600 Watts
Frequency Response (±3dB): 50Hz - 21kHz
Sensitivity (2.83V @ 1m): 89dB
Impedance: 4 Ohms
Crossover Frequency(ies): 3.5kHz, 24dB/oct
Mounting Depth: 2-11/16" Woofer, 1-1/8" Tweeter
No manuals currently available for this model.
Related Manuals
JBL C508GTI MKII 2-Way Component Speaker System
JBL GTO507C 2-Way Component System
JBL GTO607C 2-Way Component System
JBL GTO8607C 2-Way Component System
JBL P560C 2-Way Component System
JBL P660C 2-Way Component System
JBL GTO1204BP Band-Pass Enclosure
JBL GTO1204BP-D Preloaded Band-Pass Enclosure
JBL PB1220 Preloaded Enclosure
JBL MS6100 Dual-Cone Marine Speaker
JBL MS6200 2-Way Marine Speaker
JBL MS9200 2-Way Marine Speaker