Tyan Transport TA26 B3992 Server

TYAN Updated: 2009-01-30 RSS
Tyan Transport TA26 B3992 Server

The Transport TA26 (B3992) offers a full range of features for storage applications. Using a 2U rackmount form factor, the B3992-TA26 also has support for up to (8) hot-swap SATA2 or SAS drives, PCI-X and PCI Express expansion support, up to (16) DDR2 Registered DIMMs support, and comes with a full package including rails, mounting handles, documentation and much more.

Motherboard

Motherboard
- TYAN Thunder h2000M (S3992G3NR)
- Extended ATX footprint (12" x 13")

Processor
- Dual μPGA 1207-pin ZIF sockets
- Supports up to two AMD® Opteron™ 2000 Series Dual Core/ Quad Core processors
- Up to 1.0GHz Hyper-Transport link support

Chipset
- Broadcom BCM5780 (HT2000) + BCM5785 (HT1000) chipset
- National PC87417 Super I/O chip

Memory
- 128-bit Dual channel memory bus
- (16x) 240-pin DDR2 DIMM slots
- Supports memory speeds of 400/533/677/800 MHz
- Supports up to 64GB of Reg/ECC DDR2 memory
- Supports Single and Dual Rank memory

Expansion Slots
- (2) PCI-E x16 slots (each with x8 signal)
- (2) PCI-X 133/100 MHz slots
- (1) PCI-X 100 MHz slot
- (1) PCI 32-bit 33MHz, v2.3 compliant slot
- (6) total low profile cards supported
- (1) Tyan TARO™ SO-DIMM socket M9000 SAS/SATA II TARO™ card: Adaptec AIC-9405/9410 SAS controller; Supports up to 4-port (M9000-5) and 8-port (M9000-10) SAS & SATA running at 3.0 Gb/s; Adaptec HostRAID 0, 1 & 10 supported

Integrated Video
- ATI® ES1000 controller
- 32MB DDR frame buffer of video memory

Server Management
- Automatic fan speed control
- Support Tyan Server Management (TSM)
- Tyan SMDC M3291, IPMI v2.0 compliant remote server management kit (option)

Integrated LAN Controller
- Dual GbE LAN (from BCM5780): Embedded in BCM5780; Two 10/100/1000 RJ-45 LAN ports with LED
- One Intel® i82551QM fast Ethernet controller: One 10/100 RJ-45 LAN port with LED; Operating on 32bit/33MHz PCI bus

BIOS
- AMI® BIOS on 8Mbit LPC Flash ROM
- ACPI 2.0 and SRAT support
- PXE via Ethernet, USB device boot
- SMBIOS 2.3.1, BBS 1.1 compliant
- Headless Operation via serial console redirect
- 48-bit LBA Support

Chassis

Enclosure
- Industry 2U rack-mountable chassis
- Storage bays: (8) 3.5" HDD bays; (1) slim line ODD bay
- Dimension: 26" (D) x 17" (W) x 3.5" (H)
- Dimension (mm): 660 (D) x 432 (W) x 88 (H)

Power Supply
- B3992T26V8H: EPS 12V, 2U, 600W with PFC
- B3992T26V8HR: 600W 1+1 redundant power

Back I/O Ports
- (1) PS/2 Mouse & (1) keyboard ports
- (2) USB 2.0 ports
- (1) 9-pin COM port
- (1) 15-pin VGA port
- (2) GbE and (1) FE RJ-45 LAN ports

Front Panel Features
- I/O: (2) USB 2.0 ports
- LED indicators: HDD Active LED, power LED, (2) LAN LEDs
- Switch: power, reset

Storage Controller
- Integrated four (4) SATA ports at 1.5 Gb/s with NCQ supported
- Support RAID 0, 1, 5, 10

Storage Backplane
- (1) 8-port SAS backplane, supporting up to 8 SAS HDDs or SATA HDDs

Note: Default supports 4 SATA HDDs with on board SATA controller only. It is required to install 3rd party add-on card or TYAN's TARO card M9000 and SAS cable CCBL-0641 to support 8 SAS or SATA HDDs. Add-on card is not shipped with the B3992T26V8H/R barebone.