Panasonic WJ-GXE900 MPEG2 Codec Encoder
Panasonic Updated: 2007-06-29With the new Panasonic WJ-GXE900 MPEG2 encoder and the WJ-GXD900 MPEG2 decoder, a high-quality video image monitoring system can be built by connecting camera surveillance points and the control room.
With conventional wide-area/large image size surveillance systems, the problem of increased image quality deterioration exists the farther away the camera is located from the control room. The Panasonic system compresses the camera image with a high-quality MPEG2 image encoder and transmits the data to IPs, while a decoder receives the data to be displayed on a monitor. This technology ensures that the image quality will not be affected by transmission distance, thus enabling image monitoring from anywhere with a high quality image equivalent to that of TV broadcasting.
There are two types of image transmission systems --the multicast system and the unicast system--either of which can be selected and configured according to the type of system or application software.
• High-definition MPEG2
• Low delay of approximately 150ms
• Camera control using a single coaxial cable
• Camera title display
• Multicast transmission
Brochure
Operating Instruction
Related Manuals
Panasonic WJ-NT304 MPEG4/JPEG Encoder
Panasonic WJ-GXD900 MPEG2 Codec Decoder
Panasonic WV-CU950 System Controller
Panasonic WV-CU650 System Controller
Panasonic WV-CU161C System Controller
Panasonic WV-CU360C3D System Controller
Panasonic WV-CU360C System Controller
Panasonic WJ-MP204C Data Multiplex Unit
Panasonic WJ300C Video Distribution Amplifier
Panasonic WJ-SW208 Sequential/Passive Switcher
Panasonic WJ300C Video Distribution Amplifier
Panasonic WJ-SX850 Card Cage