Yamaha CS-R4003 Natural Sound Home Theater and Music System

YAMAHA Updated: 2007-10-10
Yamaha CS-R4003 Natural Sound Home Theater and Music System

COMPLETE AUDIO/VIDEO ENSEMBLE
This is as good as it gets. The CS-R4003 is a complete system including a high performance home theater receiver, Dolby Digital Processor, CD changer, dual-well auto-reverse tape deck, and a full complement of speakers. The electronic components are elegantly stacked in a handsome high-gloss black cabinet and the tower speakers flanking it share the first class finish as well.

5-CHANNEL HOME THEATER RECEIVER WITH DOLBY PRO LOGIC AND CINEMA DSP
The R-V902 is a 5-channel receiver providing superb Pro Logic performance and processing and Yamaha's Digital Sound Field Processing, and Cinema DSP. Ready for tomorrow, the R-V902 has inputs that can accept the decoded output of a Dolby Digital decoder, such as Yamaha's DDP-2, or the output from a DTS or MPEG2 5.1 channel decoder.

DISCRETE POWER TRANSISTORS
Discrete power transistors rather than IC chips are used in the amplifier section to provide the cleanest sound possible. The amp delivers 90 watts each to the three front channels and 35 watts each to the rear surround channels.

ACCLAIMED YAMAHA IC CHIPS
Yamaha's YSS-203 chip provides Digital Dolby Pro Logic with full channel separation and no front-to-back bleedthrough as well as 35mm Cinema DSP.

10 DSP/CINEMA DSP PROGRAMS -- INCLUDING 35mm MOVIE THEATER CINEMA DSP
Yamaha's exclusive Digital Sound Field Processing for music recreates the acoustic personalities of actual concert halls and other venues, such as the Roxy Theater in Los Angeles, Village Gate in New York, Anaheim Stadium, and concert halls and churches in Europe. 35mm Cinema DSP multiplies the effects of Dolby Pro Logic and Yamaha DSP to provide the best possible Pro Logic movie theater recreation in your home.

PRE-OUTS FOR ALL CHANNELS INCLUDING SUBWOOFER
Allows you to add outboard amplification and direct subwoofer connection.

NEW LEARNING AND PROGRAMMABLE REMOTE CONTROL
The advanced remote control with the R-V902 has learning capability and can be programmed for up to 13 macros, so it can perform a sequence of functions at the touch of a single button. And the remote control can adjust the subwoofer volume.

FOUR AUDIO AND FOUR AUDIO/VIDEO INPUTS
The RX-V902 is a versatile receiver incorporating four sets of audio-only inputs and 4 pairs of A/V inputs. All the video inputs have RCA jacks. Includes one set of A/V inputs on the front panel for fast and easy connection.

LOW IMPEDANCE DRIVE CAPABILITY AND IMPEDANCE SWITCHING
Yamaha's famed low impedance drive circuitry is included in this receiver so that it can handle virtually all loads and a wide variety of speakers. For further speaker matching, the receiver's back-panel switches can be set for either high or low-impedance speakers.

LINEAR DAMPING FACTOR CIRCUIT
The advantage of full range, 20 to 20,000 Hz, damping is that it improves the definition and resolution of the sound output throughout the audible frequency range.

DUAL CENTER CHANNEL OUTPUTS
You can easily add a second center channel speaker. This is especially convenient for large-room systems or for those using a big screen or projection TV.

BASS EXTENSION CONTROL
Accentuates the bass by adding a 7 dB boost at around 70 Hz.

A/B SPEAKER SELECTOR
Allows selection of either a first set of speakers or a second -- or both.

SLEEP TIMER
Permits a delayed receiver turn off. You can set it for up to two hours in 30 minute increments.

40-STATION DIRECT ACCESS PRESET TUNING
Up to 40 preset AM and FM stations can be grouped in five groups eight stations. These groupings make it easy for family members to easily access their favorite stations or to have musical genres, such as all the jazz stations, grouped together.

BINDING POST SPEAKER TERMINALS
Yamaha's heavy-duty binding post speaker terminals accept banana plugs, spade connectors, and a variety of speaker wire, including heavy gauge cable.

DDP-2 DOLBY DIGITAL DECODER
The DDP-2 takes the R-V902 receiver to another level. It adds Dolby Digital processing, the most sophisticated Dolby Surround technology now on laser discs, DVD Video, and Music DVDs.

NEW YAMAHA DESIGNED IC CHIPS
Yamaha has designed and employed single function IC chips, called ASICs -- Application Specific Integrated Circuits -- for the DDP-2. ASICs are more efficient than multi-function chips and provide the most accurate decoding possible. Yamaha's YSS-243 is an ASIC whose single function is decoding Dolby Digital.

TRI-FIELD PROCESSING
A second new ASIC, YSS-245, provides Yamaha's exclusive Tri-Field Processing which applies Digital Sound Field Processing technology to Dolby Digital and creates a true movie theater experience in the home. It develops independent enhanced sound fields for the front signals as well as for left and right surround.

ELECTRONIC INPUT SELECTOR
Electronic input selector with two optical and two coaxil digital inputs makes the DDP-2 suitable for use with both laserdisc players (RF demodulator required) and DVD players.

THREE DYNAMIC RANGE CONTROLS FOR DOLBY DIGITAL
Minimum, Standard, and Maximum Dynamic range settings allow optimization for different home theater environments.

OPERABLE VIA YAMAHA REMOTE
For easy operation, the DDP-2 input switching can be controlled from the remote keypad of any Yamaha Dolby Digital ready receiver.

FLUORESCENT FRONT PANEL DISPLAY
The fluorescent front panel display makes it easy to see the DDP-2's operating status.

MASTER VOLUME CONTROL
The front panel master volume control provides easy, one-step adjustment of up to +/- 10 dB.

CDC-902 5-DISC CD CHANGER WITH PLAYXCHANGE
Flagship carousel-type changer with 5-disc capacity. Features Yamaha's patented PlayXchange which permits four discs to be replaced while the fifth is playing.

DIGITAL VOLUME CONTROL OPERABLE BY REMOTE
The noiseless digital volume control can be easily adjusted via the CDC-902 remote control keypad.

10-KEY DIRECT ACCESS
Allow you to access each track at the touch of a button on the front panel or the remote keypad.

MULTIPLE OUTPUTS
The variable analog output is augmented by an optical digital output for the most accurate signal delivery possible.

TAPE EDIT CAPABILITY
Tell the CD changer the length of the tape you're using and the changer will automatically arrange the selections to best fit the recording time.

PEAK SEARCH
Finds the peak output levels on the disc selections and allows you to set the proper recording level for the best possible dub.

YAMAHA S-BIT DAC
Two pairs of Yamaha's high precision single-bit digital-to-analog convertors provide accurate conversion from the digital domain to analog to assure a natural sound quality.

SUPER-SILENT MECHANISM
Only the music will be heard, thanks to Yamaha's newly designed super silent mechanism.

INTELLIGENT DIGITAL SERVO SYSTEM
Automatically adjusts tracking, focus, and motor speed to compensate for disc defects, warpage, and dust.

CONTOURED FRONT PANEL
Style has not been left out. The CDC-902 features Yamaha's new contoured front panel.

REMOTE CONTROL CONVENIENCE
A 33-button infrared remote control keypad gives complete operating control at the touch of a button.

SYNCHRO START CAPABILITY
Allows one-touch recording from the remote control. Synchro Start automatically puts a Yamaha cassette deck in the record mode before it begins to play the CD selections.

K-903 DUAL-WELL AUTO-REVERSE CASSETTE DECK
Features Dolby B and C noise reduction. Allows independent operation of either Deck A or B. Synchro Start operation for easy dubbing of CDs.

RELAY PLAY
Relay Play initiates play on Deck B after Deck A has finished. With Relay Play you can have up to 3 hours uninterrupted play using two C-90 cassettes.

HIGH QUALITY HEADS
Yamaha GF heads provide excellent record and playback performance.

MICROCOMPUTER CONTROLLED FULL-LOGIC OPERATION
Swift, sure, and responsive transport control.

TWO-SPEED DUBBING
High-speed dubbing allows you to copy a tape in half the time.

4-DIGIT TAPE COUNTER
Allows you to quickly find a place on the tape.

WIDE RANGE PEAK LEVEL METERS WITH PEAK HOLD
Permits the best possible recordings by allowing you to accurately set the recording levels.

THREE-WAY TOWER SPEAKERS
The main left and right speakers for the CS-R4003 system are the NS-A3500's. Each tower contains two 8" woofers, a 4" midrange, and a 1" tweeter. The dual woofers eliminate the need for a subwoofer to deliver the low bass necessary for excellent home theater. The speakers are magnetically shielded and can be placed near a TV without distorting the picture. The cabinets are high-gloss black, matching the component cabinet.

WALL OR SHELF MOUNTABLE REAR EFFECTS SPEAKERS
The versatile NS-E60s provide the rear effects channels. The single 4" driver is full-range and the speakers can be either shelf or wall mounted.

DUAL-DRIVER TWO-WAY CENTER CHANNEL SPEAKER
Yamaha's NS-AC142 utilizes two 5" polypropylene woofers and a 1" high tech dome tweeter with a neokymium magnet to deliver the important center channel.

ELEGANT COMPONENT CABINET
The CS-R4003's electronic components fit in the elegant high-gloss black YSR-3500 cabinet. The cabinet has an attractive smoked glass door to maintain a neat appearance.