BenQ MP522 Projector

BenQ Updated: 2008-12-08 RSS
BenQ MP522 Projector

Kick back and enjoy pictures projected at 26dB with the BenQ MP quietness series projectors. Listen carefully! You may hear even hear the music of silence!

A Well-Defined Posterior – A Spectator's Delight
MP522's lines are soft and curvaceous; there are no sharp edges anywhere on the exterior. The full-bodied design of the MP522 also represent the myriad of functions that come standard with this model; whether it's for business, education, family entertainment, or computer games, the MP522 does it all. The most outstanding feature of the MP522 design is on the projector's posterior. The set of raised lines along the sides of the projector flare out from the back and produce the visual effect of giving lift and extra body.

Anti-Vibration Equals Added Quietness
Inside, our quiet-running cooling fan also includes a noise-absorbing sponge while rubberized components dampen vibration that can cause noise. Outside, high elasticity rubber stops resonance with table tops in its tracks.

Designed in Every Detail
Silent Engineering means that we look everywhere for improvements. We've re-designed our color wheel for maximum absorption of noise and vibrations. We've also added a damper fixed between the MP522's color wheel and bracket for added reduction in noise and vibration.

Low-Obstruction Ventilation Design
We've designed for a smoother flow of air through the MP522. This lowers heat and allows exhaust fans to run at lower speeds for lower noise

Texas Instruments' advanced on-chip BrilliantColor™ technology boosts mid-tone colors, increasing overall brightness and producing a more vibrant picture

3D Color Management
3D color management lets users fine-tune the hue, saturation, and gain of primary colors to achieve the exact picture quality desired.

Wall Color Correction
Wall color correction provides optimized viewing experience for different surfaces, such as a classroom blackboard, that might be used to display content instead of a regular projector screen.


Native Resolution: XGA (1024 x 768)
Projection System: DLP® technology by Texas Instruments®
Brightness: 2000 ANSI lumens
Contrast Ratio: 1000:1 (Full on/Full off)
Image Size: 27.5" to 300"
Auto Switching Power Supply: 100 to 240 VAC, 50 to 60 Hz
Zoom Ratio: Manual Zoom, 1.10:1
Display Color: Full 16.7 million color palette
Aspect Ratio: 4:3 Native, 16:9 Selectable
Horizontal Frequency: 31 ~ 82 KHz
Vertical Scan Rate: 48 ~ 85Hz
Input Terminals:
Analog RGB: D-sub 15 pin x 1
Component Video: D-sub 15 pin (Shared with Analog RGB connector)
S-Video: Mini Din 4 pin x 1
Composite Video: RCA x 1
Video Compatibility: NTSC, PAL, SECAM