CoolMax PS-124 Power Supply Tester

CoolMax Updated: 2008-12-12 RSS
CoolMax PS-124 Power Supply Tester

The PS-124 power supply tester is to help you check the ATX power. Just plug and wait, the LED light will show you what you need to know. If the power good signal is too low or too high, it will alarm. If the power output is working, the LED will turn on and a short alarm will alert you that it is working. If the power output fails, there will be no LED light display or alert. It's as easy as switching a light on and off. Coolmax's PS series is easy to use, to the point, and accurate.

This product is a simple tester for switching power supply. It makes it easy to test the power supply output.
1. Turn-on your power supply.
2. Plug-in your 24 pin power supply connector to mini tester
3. Check LED light it ON or OFF
(+5V. +12V. +3.3V. -5V. -12V. +5VBS. PG)
- If the power output is working, the LED will light and you will hear a sound
- If the power output fails, you won't see the LED light & no sound
4. Plug the HDD con, check +12V, +5V
5. Remove HDD, Plug p4(p6/p8)con, check +12V
6. Remove p4(p6/p8)con, plug FLOPPY con, check +12V, +5V
7. Remove Floppy con, plug SATA con, check +12V, +5V, +3.3V
8. Do not plug wrong position when you use P4 connector

Warning:
This product is designed only for power supply output tests. Do not leave it connected to the power supply unattended. It generates heat and could possibly damage your power supply.
24-pin Power Connector
Power HDD Connector
Power P4 Connector
Power Floppy Connector