Rosewill RNX-EasyN1 Wireless USB Adapter

Rosewill Updated: 2009-01-06 RSS
Rosewill RNX-EasyN1 Wireless USB Adapter

* Supports 1T1R MIMO architecture with fully forward compatible with IEEE802.11n draft 3.0 and IEEE 802.11b/g standard.
* NOTICERNX-EasyN1 doesn't support Linux now.

Specifications

Standards: IEEE 802.11b/g/n
Data Tates: Up to 150Mbps
Security: WPA/WPA2 (AES, 64,128-WEP with shared-key authentication)
WPS PIN, PBC (WiFi Protected Setup)
QoS-WMM
WAP/WAP2: WPA2
Interface: USB 2.0
Frequency Band: 2.4GHz - 2.484GHz
Channels: 11 Channels (US, Canada) 13 Channels (Europe)
Modulation: OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK
LEDs: Link/Activity
Transmitted Power: 2.412~2.472G(IEEE802.11b)
>= 16dBm @1~11Mbps
2.412~2.472G(IEEE802.11g)
>= 16 dBm @6Mbps
>= 12 dBm @54Mbps
2.412~2.472G(IEEE802.11N)
>= 16dBm
Antenna: Printed ANT
Temperature: 0°C - 45°C (32°F - 113°F)
Humidity: 15% - 95%, Non-Condensing
Front Ports: USB, Audio, IEEE 1394
80mm Fans: 1 x 80mm Blue LED Rear Fan
120mm Fans: No
Side Air duct: Yes
Dimensions: 18.4" x 8.2" x 17.2"(D x W x H) (Bezel Not Included)
Weight: 29.2 lbs.