Motorola IAP6300 Intelligent Access Point
Motorola Updated: 2008-08-19 RSSIn a MOTOMESHTM Solo network, the Intelligent Access Point (IAP) is a small, low-cost device that acts as the transition point from the wireless network to the wired world. Each IAP offers a maximum burst rate of up to 6 Mbps that can be used for voice, video and data communications.
If greater network capacity is required, additional IAPs can be easily deployed - without the need for extensive RF or site planning. The location of IAPs is non-critical due to the self-forming, self-healing and self-balancing nature of the MOTOMESH Solo network.
Supports High-Speed Mobility
The MOTOMESH Solo solution has been designed from the ground up as a mobile broadband network. Wide area mobility management and seamless handoffs between IAPs help ensure consistent service and sustained broadband data rates, even with clients moving at highway speeds.
Easy to Install and Deploy
IAPs are designed to mount on utility poles, billboards, buildings, etc. Simple mounting hardware and plug-in power and network connections make deployment easy. IAPs power up and integrate into the network automatically.
Up to 6 Mbps Burst Data Per IAP
Each IAP provides up to 6 Mbps burst data. Since IAPs utilize intelligent data rate selection and sophisticated self-forming routing algorithms, new IAPs can be added to address hot spots, or any place increased capacity is needed. Deployment is simple, as new IAPs automatically integrate themselves into the network.
Fast and Accurate Position Location
Depending on network configuration, every MOTOMESH Solo IAP can provide quick and accurate position location information that does not require the use of GPS satellites. Location information is provided in standard NMEA0183 format, or through the API. This location information can assist in the deployment of resources, creating a visual map of asset positions at an incident or across an entire city.
Supports End-to-End Industry Standard IP
Intelligent Access Points transparently support end-to-end, standards-based Internet Protocol (IP) applications and devices. This maximizes existing investments in client hardware and software, while eliminating training for new applications or procedures.
MOTOMESH Solo (653Kb pdf)
MOTOMESH Solo IAP (102Kb pdf)
MOTOMESH Solo MWR (104Kb pdf)
MOTOMESH Solo VMM6300 (74Kb pdf)
MOTOMESH Solo WMC6300 spec sheet (124Kb pdf)
Related Manuals
Motorola PWR6300 Portable Wireless Router
Motorola VMM6300 Vehicle Mounted Modem
Motorola WMC6300 Wireless Modem Card
Motorola MWR6300 Mesh Wireless Router
Motorola IAP4300 Intelligent Access Point
Motorola WSM6300 Wireless Modem
Motorola PTP 600 Point-to-Point Wireless Ethernet Bridge
Motorola PTP 500 Point-to-Point Wireless Ethernet Bridge
Motorola PTP 400 Point-to-Point Wireless Ethernet Bridge
Motorola PTP 300 Point-to-Point Wireless Ethernet Bridge
Motorola PTP 100 Point-to-Point Wireless Ethernet Bridge
Motorola WAP 400 WiMAX Access Point