Tyan Trinity i845 S2090 Motherboard

TYAN Updated: 2009-01-29 RSS
Tyan Trinity i845 S2090 Motherboard

The Trinity i845 brings next-generation processor performance to the masses. Utilizing the Intel 845 chipset, this new system board supports the latest Socket 478 Intel Pentium 4 processors, as well as cost-effective Synchronous DRAM. These two features provide exceptional CPU and memory performance at an attractive price. The Trinity i845 also features a 4x AGP slot for advanced graphics performance, six PCI slots for flexible expansion and ATA-100 support.

Processor
- Single PGA478 ZIF socket; onboard VRM
- Supports one Intel Pentium 4 processor
- System bus support for 400MHz

Chipset
- Intel 845 chipset
- 82802AB FWH, 82801BA ICH2
- Winbond W83627HW-AW LPC-IO

Memory
- Three 3.3v 168-pin DIMM sockets
- Supports up to 3GB of PC133 SDRAM
- Supports Unbuffered memory modules

Expansion Slots (Total of seven usable slots)
- One AGP slot supports 4x cards (1.5v slot design)
- Six 32-bit 33MHz (5-volt) PCI slots

Integrated PCI IDE
- Dual-channel master mode
- Up to four Enhanced IDE devices
- Support DMA 100/66/33 IDE and ATAPI compliant devices

Hardware Monitoring
- Winbond W83627HF-AW hardware monitoring ASIC; CPU temperature, voltage, and fan speed monitoring; 2-pin chassis intrusion header

Integrated I/O Interfaces
- One floppy connector supports up to two drives
- Two 9-pin 16550-based serial ports
- One 25-pin SPP/ECP/EPP parallel port
- Two USB ports; PS/2 keyboard and mouse ports

Note: The Trinity i845 S2090 accepts a standard ATX 2.01 power supply, with a minimum output of 30 amps on the 5-volt line.

BIOS
- Award BIOS on 4Mb Flash ROM
- Supports APM v1.2 & ACPI v1.0
- User settings for hardware monitoring
- Auto-configuration of IDE hard drive types
- Muliple boot options; DMI 2.0 compliant

Form Factor
- ATX footprint (12" x 9.6", 304.8 x 243.84mm)
- One 20-pin ATX power connector
- Stacked parallel (one) and serial (two) ports
- Stacked USB (two) ports
- Stacked keyboard and mouse ports