Tyan Tomcat K8SH S3850 Motherboard

TYAN Updated: 2009-01-29 RSS
Tyan Tomcat K8SH S3850 Motherboard

The Tomcat K8SH (S3850) packs strong server features into a compact ATX form factor. With support for AMD Opteron™ 100 series processors with Dual Core support, Registered DDR400/333 memory support, dual Gigabit Ethernet ports, SATA RAID, and many built-in firmware and power management features, the Tomcat K8SH provides core server capabilities for today's dense server configurations.

Processor
- Single µPGA 939-pin socket
- Supports AMD Opteron™ 100 series processors
- Up to 800MHz Hyper-Transport link support

Chipset
- Broadcom HT1000; NS PC87417 super I/O chip

Memory
- Four 184-pin DDR DIMM sockets
- Up to 8GB of unbuffered DDR 400/333 memory
- Supports ECC memory modules
- Dual channel memory bus

Expansion Slots
- (1) one PCI-X 64-bit/133MHz (3.3V) slot
- (4) four PCI v2.3 32-bit/33MHz slots
- (1) one Tyan TARO™ SO-DIMM socket
- Total of five usable slots

Integrated I/O Interfaces
- (1) floppy connector for up to two drives
- (1) IDE connector for two IDE devices
- (2) USB v2.0 ports (via cable, 2 x 4 pin)
- (4) SATA ports
- (1) COM2 header

Back Panel I/O Ports
- (1) PS/2 keyboard & mouse ports
- (2) RJ45 10/100/1000 Base-T port w/ activity LED
- (2) USB 2.0 ports
- (1) 9-pin UART Serial port
- (1) 15-pin VGA port

System Management
- (1) analog device ADT7476
- Temperature & voltage monitor; watchdog timer
- (1) 3+1-pin CPU fan header with tachometer monitoring and smart FAN control
- (6) 3+1-pin system fan headers with tachometer monitoring, all of them support smart FAN control
- (1) 2x7-pin fan connector (reserve to support Tyan Fan Adapter Board - M1012)

Integrated PCI Graphics
- XGI Volari Z7™ (XG20) graphics controller
- 16MB Frame Buffer of video memory (upgradable to 32MB)

Integrated LAN Controllers
- Two Intel i82541PI GbE LAN controllers: Operates on PCI 32-bit/33MHz bus; With ASF 2.0/WfM/Teaming support

Integrated Serial ATA Controller
- Serial ATA-II Host controllers embedded
- Supports four SATA-II ports running at 1.5 Gb/s with NCQ (SATA-II Phase I)
- RAID 0, 1, 5, 10 supported

Optional Modules
- Various expansion cards available

BIOS
- AMI BIOS on 8Mbit LPC Flash ROM
- Serial console redirect
- USB boot supported
- Supports ACPI
- PnP, DMI 2.0, WfM 2.0 Power Management

Power
- On board 4-phase VRD
- EPS 12V (24+8) power connectors

Form Factor
- ATX footprint (12" x 9.6"; 305mm x 244mm)
- 6-layer board