Tyan Tiger 200 S2505 Motherboard

TYAN Updated: 2009-01-29 RSS
Tyan Tiger 200 S2505 Motherboard

The Tiger 200 incorporates leading-edge technology with superior usability, making it the ideal platform for entry-level dual-processor server applications. With its low-profile socketed processor design, integrated video and dual network connections, the Tiger 200 is ideally suited for desktop or rackmount installations, including the latest space-efficient 2U chassis designs. There are plenty of PCI slots for adding high-performance storage or network controllers, as well as four DIMM sockets that will accept up to 1.5 gigabytes of high-speed PC133 SDRAM.

* Processor
- Dual PGA370 ZIF sockets
- Supports up to two Intel Pentium III processors (FC-PGA); two onboard VRMs (VRM 8.4 spec)
- Front-Side Bus supports 100MHz and 133MHz

* Chipset
- VIA Apollo Pro 133A chipset (VT82C694X & VT82C686B)

* System Memory
- Four 168-pin 3.3V DIMM sockets
- Supports PC100 up to 2GB (8 banks/4 DIMMs)
- Supports PC133 up to 1.5GB (6 banks/3 DIMMs)
- Supports SDRAM and VCM SDRAM memory types

* Hardware Monitoring
- VIA VT82C686 hardware monitoring chip
- 3-pin fan monitoring headers
- 2-pin chassis Intrusion header
- CPU temperature and voltage monitoring
- 3-pin Wake on Modem (WoM) header

* Expansion Slots
- One AGP slot supports 2x/4x modes
- Five 32-bit 33MHz (5-volt) PCI slots (v2.2 compliant); total of six usable slots

* Integrated I/O
- One floppy connector supports up to two drives
- Two 9-pin 16550-based serial ports (one port via cable)
- One 25-pin SPP/ECP/EPP parallel port
- Four USB Ports (Two ports via optional cable)
- PS/2 keyboard and mouse ports

* Integrated LAN Controllers
- Two Intel 82559 LAN controllers
- 10/100Mbps data transfer rate per controller

* Integrated PCI IDE
- Dual-channel master mode
- Supports up to four Enhance IDE devices
- Support for DMA 100/66/33 IDE and ATAPI compliant devices

* Integrated IDE RAID
- Promise FastTrak100 IDE RAID chipset
- Dual-channel master mode
- Support up to four Enhanced IDE devices
- Support for DMA 100/66/33 IDE drives
- Support IDE RAID functionality (RAID 0,1,0+1)

* Integrated Graphics
- ATI Rage XL graphics accelerator
- 4MB frame buffer (1Mx16 SDRAM)
- Standard 15-pin analog VGA port

* BIOS
- Award BIOS 2Mbit Flash ROM
- User settings for hardware monitoring
- Auto-configuration of IDE hard drive types
- Multiple boot options; DMI 2.0 compliant

* Form Factor
- ATX footprint (12" x 9.6"); 6-layer board
- One 20-pin ATX power connector
- Stacked keyboard and mouse ports
- Stacked USB ports (two)
- One serial and one VGA port
- Two RJ45 LAN ports with LED