Tyan Thunder K8SD Pro S2882-D Motherboard

TYAN Updated: 2009-01-29 RSS
Tyan Thunder K8SD Pro S2882-D Motherboard

A classic dual processor server board reborn! Introducing the Thunder K8SD Pro (S2882-D), a multi-purpose server for a wide range of applications. Based on a dual AMD Opteron™ 200 series 32/64-bit architecture with single and DUAL CORE support, the Thunder K8SD Pro (S2882-D) is a powerful and stable server platform for today's demanding performance requirements. Thunder K8SD Pro (S2882-D) is specially designed to provide competitive features such as support for four PCI-X expansion cards, onboard Ultra320 SCSI functionality, 16GB of Registered DDR400/333 memory with quad-rank, remote management support, built-in video and integrated (2) Gigabit Ethernet and (1) 10/100 Ethernet LAN ports for powerful broadband connectivity. In short, the Thunder K8SD Pro (S2882-D) is the ideal choice for 1U and 2U server environments.

Processor
- Dual µPGA 940-pin ZIF sockets
- Up to two AMD Opteron™ 200 series processors
- Supports Single and Dual Core processors
- Two onboard 3-phase VRMs
- 128-bit DDR dual-channel memory controller (integrated in CPU)

Chipset
- AMD-8131™ HyperTransport™ PCI-X Tunnel
- AMD-8111™ HyperTransport™ I/O Hub
- Winbond™ W83627HF Super I/O ASIC
- Analog Devices ADM1027 Hardware Monitoring IC

Memory
- 128-bit dual channel memory bus
- Eight 184-pin 2.5-Volt DDR DIMM sockets
- Supports up to 32GB of Registered DDR
- Supports ECC type memory modules
- Supports DDR 266/333/400
- Supports Single/Dual/Quad Rank mem. modules

Expansion Slots (Total of five usable slots)
- Two independent 64-bit PCI-X buses: Two 100/66/33 MHz PCI-X slots at PCI-X bus A; Two 133/100/66/33 MHz PCI-X slots at PCI-X bus B
- One legacy 32-bit 33 MHz (5V) PCI  slot

Back Panel I/O Ports
- Stacked PS/2 mouse and keyboard ports
- Stacked two USB v1.1 ports + 1 RJ45 10/100 Base-T port w/ activity LED
- One 9-pin UART serial port
- One 15-pin VGA port
- Two RJ45 10/100/1000 Base-T ports with activity LED

Integrated I/O
- One floppy connector supports up to two drives
- One 9-pin serial ports connector
- One 25-pin parallel port connector
- Four USB v1.1 ports
- Three front panel LAN activity LED connectors

System Management
- Two 3+1-pin CPU fan header with tachometer input and smart fan control (PWM)
- Five 3-pin system fan headers with tachometer input, three of them with smart fan control
- One 2-pin Chassis Intrusion header
- Temperature, voltage and fan monitoring
- Watchdog timer

Integrated PCI Graphics
- ATI® RAGE™ XL PCI graphics controller
- 8MB Frame Buffer of video memory

Integrated LAN Controllers
- Broadcom BCM5704C dual-channel GbE: Two RJ-45 LAN connectors with LEDs; Connected to PCI-X Bridge A
- Intel 82551QM 10/100 LOM: Operating at 32-bit/33MHz PCI bus

Integrated Enhanced IDE Controller
- Dual IDE channels supports up to four EIDE devices
- Supports for UDMA 33/66/100/133 IDE drives and ATAPI compliant devices

Integrated SATA Controller
- Silicon Image Sil3114 SATA RAID Accelerator
- Supports S-ATA 1.0 specification
- Supports 4 channel SATA port for up to four SATA devices
- Supports RAID 0, 1, 0+1
- Connected to legacy 32-bit 33MHz PCI bus

Integrated Dual Channel SCSI (option)
- Adaptec AIC-7902W Dual-Ch. U320 SCSI controller
- Connects to PCI-X Bridge A
- Adaptec® ZCR card support

Intelligent Platform Management Interface Header
- TYAN Server Management Daughter card (optional) supports features listed below via IPMI header ( SMDC/TSO Support)
- Baseboard Management Controller (BMC)
- Tailored for IPMI
- Supports KCS and BT styles
- Flexible Windows/Linux Management Solution
- Supports RMCP and SNMP protocols
- Supports ASF standard and EMP
- I2C serial multi-master controllers and UARTs
- Build-in IPMB connector
- Remote power on/off and reset support (IPMI-over-LAN)

BIOS
- AMI® BIOS 8.0 on 4Mbit LPC Flash ROM
- Supports APM 1.2 & ACPI 1.0
- Power Management S1, S4, and S5 support

Form Factor
- Extended ATX footprint (13" x 12", 304.8 x 330.2 mm)
- EPS12V universal power connectors