Tyan Thunder K8S Pro S2882 Motherboard

TYAN Updated: 2009-01-29 RSS
Tyan Thunder K8S Pro S2882 Motherboard

Based on the AMD Opteron™ 64-bit architecture, the Thunder K8S Pro (S2882) is a powerful and stable server platform for today's demanding performance requirements.

Thunder K8S Pro (S2882) is a specially designed platform with competitive features such as eight DIMM slots for 16GB of excellent memory performance, IPMI compliant server management support, and Gigabit Ethernet/Fast Ethernet LAN ports for powerful broadband connectivity. The Thunder K8S Pro (S2882) is ideal choice for 1U and 2U server environments.

Processor
- Dual µPGA 940-pin ZIF sockets
- Supports up to two AMD Opteron™ processors
- Two onboard 3-phase VRMs
- 128-bit DDR dual-channel memory controller (integrated in CPU)

Chipset
- AMD-8131™ HyperTransport™ PCI-X Tunnel
- AMD-8111™ HyperTransport™ I/O Hub
- Winbond™ W83627HF Super I/O ASIC
- Analog Devices ADM1027 Hardware Monitoring IC

Memory
- 128-bit DDR memory bus
- Eight 184-pin 2.5-Volt DDR DIMM sockets: each CPU controls four
- Supports up to 16GB of Registered DDR
- Supports ECC type memory modules
- Supports PC3200 / 2700 / 2100 / 1600 DDR

Expansion Slots (Total of five usable slots)
- Two independent PCI-X buses
- PCI-X bridge A supports 64-bit 133/100/66/33 MHz with two 3.3V PCI-X slots (one with ZCR support - option)
- PCI-X bridge B supports 64-bit 133/100/66/33 MHz with two 3.3V PCI-X slots
- One legacy 32-bit 33 MHz (5V) PCI  slot

Back Panel I/O Ports
- Stacked PS/2 mouse and keyboard ports
- Stacked two USB v1.1 ports + 1 RJ45 10/100 Base-T port w/ activity LED
- Two 9-pin UART serial ports
- One 15-pin VGA port
- Two RJ45 10/100/1000 Base-T ports with activity LED

Integrated I/O
- One floppy connector supports up to two drives
- One 9-pin serial ports connector
- One 25-pin parallel port connector
- Four USB v1.1 ports
- Three front panel LAN activity LED connectors

System Management
- Seven 3-pin fan headers with tachometer monitoring
- Five fan headers with (PWM) speed control
- One 2-pin Chassis Intrusion header
- Temperature, voltage and fan monitoring

Integrated Enhanced IDE Controller
- Dual IDE channels supports up to four EIDE devices
- Supports for UDMA 33/66/100/133 IDE drives and ATAPI compliant devices

Integrated PCI Graphics
- ATI® RAGE™ XL PCI graphics controller
- 8MB Frame Buffer of video memory

Integrated LAN Controllers
- Broadcom BCM5704C dual-channel GbE: Two RJ-45 LAN connectors with LEDs; Connected to PCI-X Bridge A
- Intel 82551QM 10/100 LOM: Operating at 32-bit/33MHz PCI bus

Integrated SATA Controller
- Silicon Image Sil 3114 SATA controller
- Supports four-ch, SATA RAID (RAID 0, 1, 0+1)
- Total of four 7-pin SATA 1.0 connectors
- Supports up to four Serial ATA150 drives
- Connected to legacy 32-bit 33MHz PCI bus

Integrated Dual Channel SCSI (option)
- Adaptec AIC-7902W Ultra 320 SCSI controller
- Connects to PCI-X Bridge A
- Adaptec® zero-channel RAID technology support

Intelligent Platform Management Interface Header
- TYAN Server Management Daughter card (optional) supports features listed below via IPMI header (SMDC/TSO Support)
- QLogic™ Zircon Baseboard Management Controller (BMC)
- Tailored for IPMI highest 1.5 Spec.
- Supports KCS and BT styles
- Flexible Windows/Linux Management Solution
- Supports RMCP and SNMP protocols
- Supports ASF standard and EMP
- I2C serial multi-master controllers and UARTs
- Build-in IPMB connector
- Remote power on/off and reset support (IPMI-over-LAN)

BIOS
- AMI® BIOS 8.0 on 4Mbit LPC Flash ROM
- Supports APM 1.2 & ACPI 1.0
- Power Management S1, S4, and S5 support

Form Factor
- Extended ATX footprint (13" x 12", 304.8x330.2mm)
- EPS12V (24pin + 8pin) power connectors