Tyan Thunder K7X Pro S2469 Motherboard

TYAN Updated: 2009-01-29 RSS
Tyan Thunder K7X Pro S2469 Motherboard

Designed around the AMD-760 MPX chipset, the Thunder K7X Pro supports two Athlon™ MP processors, featuring a "convergence design" - an ideal layout that satisfies the capabilities of both servers and workstations. The Thunder K7X Pro features an AGP Pro110 slot, two 64/66 PCI slots, optional Adaptec dual-channel Ultra320 SCSI support, Gigabit and Fast Ethernet, ATX 12V/EPS12V universal power, and more. For maximum memory capacity in a space restricted environment, this platform also offers angled memory sockets.

Processor
- Dual mPGA462 ZIF sockets
- Supports up to two AMD Athlon MP processors
- Two onboard 3-phase VRMs
- Front-Side Bus support for 266/200MHz

Chipset
- AMD-760 MPX chipset;
- AMD-762 north bridge & AMD-768 south bridge
- Winbond™ W83627HF Super I/O ASIC
- Winbond W83782D hardware monitoring IC

Memory
- Four 184-pin 2.5-Volt DDR DIMM sockets
- 25° DDR sockets enable rackmount installation
- Supports up to 4GB* of Registered DDR 200/266
- Supports ECC (72-bit) memory modules

Expansion Slots
- One AGP Pro110 slot; also supports 4x/2x AGP
- Two 64-bit 66MHz (3.3-Volt) PCI slots
- Three 32-bit 33MHz (5-Volt) PCI slots
- Total of six usable slots

Integrated I/O
- One floppy connector supports up to two drives
- Two 9-pin serial connectors
- One 25-pin ECP/EPP/SPP parallel header
- Four USB 1.1 ports (two via optional cable)
- PS/2 keyboard and mouse connectors

Integrated PCI IDE
- Provides two PCI bus master channels for up to four Enhanced IDE (EIDE) devices
- Supports for UDMA-100/66/33 IDE drives and ATAPI-compliant devices

Integrated SCSI (opt)
- Adaptec AIC-7902W dual-channel controller; Ultra320 SCSI support
- Support up to 15 LVD SCSI devices per channel
- Channel A and Channel B - 68-pin connectors
- Adaptec and Intel Zero-Channel RAID ready

Integrated Video
- ATI® RAGE™ XL PCI graphics controller
- 8MB frame buffer of video memory

Integrated LAN Controllers
- Fast Ethernet and Gigabit Ethernet controllers: Intel® 82545EM 10/100/1000Mbps controller, Intel® 82551QM 10/100Mbps controller
- Two RJ-45 LAN connectors with LEDs
- Two Front Panel LED headers

System Management (MDC/TSO Support)
- 3-pin fan monitoring headers
- Winbond W83782D hardware monitoring ASIC
- CPU temperature and voltage monitoring

Server Management (Daughtercard opt)
- QLogic™ Zircon Baseboard Management
- BMC based on powerful ARM7 technology
- Tailored for IPMI highest 1.5 Spec.
- Supports KCS and BT styles
- Supports Windows/Linux Management solution
- Supports RMCP and SNMP protocols
- Supports ASF standard and EMP
- I 2C serial multi-master controllers and UARTs
- Built-in IPMB connector
- Supports remote Power on/off and reset (IPMI over LAN)

BIOS
- Phoenix BIOS on 4Mbit Flash ROM
- PXE boot and SMBIOS v2.3 support
- BIOS Boot specification v1.01 (BBS) support
- Boot to USB (Mass Storage Class) support
- Power on after AC failure control; ACPI support

Form Factor
- Extended ATX Footprint (13" x 12", 330.2mm x 304.8mm)
- ATX12V/EPS12V universal power connectors
- Stacked parallel (1), serial (1) and VGA (1) ports
- Stacked USB (2) ports
- Side-by-side RJ-45 LAN (2) ports with LEDs
- Stacked keyboard and mouse ports