Sennheiser ew 300 IEM G2 Wireless Monitor Set

Sennheiser Updated: 2009-01-15 RSS
Sennheiser ew 300 IEM G2 Wireless Monitor Set

The heart of the evolution wireless G2 monitoring system is the SR 300 IEM G2 rack-mount transmitter, which transmits the monitoring signals to the extremely compact EK 300 IEM G2 bodypack receiver. Designed for rugged live work, the receiver is easy to use and protected against accidental operation. The artist or the sound engineer listens via stereo earphones with skin-friendly ear moulds. Transmitter and receiver feature nine frequency banks with up to 12 directly accessible presets each – ready for immediate use.

The receiver is fitted with a special Focus Mode, i.e. it can be switched from stereo reception to double mono, with one channel reserved for the mix and the other one for your own voice/instrument. The level of each channel is set by the balance control. The receiver also features a switchable limiter which keeps the monitoring sound at a safe level.


* 1440 tunable UHF frequencies for interference-free reception
* Absolutely reliable transmission and extended range due to high RF output power
* Pilot tone squelch for eliminating RF interference
* Automatic frequency scan feature searches for available frequencies
* Transmitter and receiver with rugged metal housings
* Rack mount included
* Receiver has contacts for recharging the BA 2015 rechargeable battery pack directly in the receiver
* Receiver with backlit display (lights up when a button is pushed)
* Switchable Hi Boost
* Transmitter features user-friendly menu operation via two-colour backlit graphics display (green = OK; red = peak warning)
* Headphone monitoring output on the transmitter
* Lock function avoids accidental changing of settings
* HDX compander for crystal-clear sound
* Receiver features 4-step battery status display
* Wide range of accessories adapts the system to any requirement

Delivery Includes

* 1 SR 300 G2 stereo transmitter
* 1 EK 300 G2 stereo bodypack receiver
* 1 IE 4 earphones
* 1 GA 2 rack mount
* 1 NT 2-1 power supply unit
* 1 telescopic antenna
* 2 AA size batteries
* Operating instructions
* 1 BNC-Cable

Technical Data

Modulation: FM, MPX-Stereo
RF frequency range: 518.....866 MHz
Transmission/receiving frequencies: 1440
Presets: 12
Switching bandwidth: 36 MHz
Peak deviation: +/- 48 kHz
Compander: HDX
Signal-to-noise ratio: > 91 dB(A)
THD, total harmonic distortion: < 0,9 %
Frequency response: 40.....15000 Hz
In compliance with: ETS 300422, ETS 300445, CE, FCC
Antenna connector: BNC
Audio-XLR connector: 2x XLR3 balanced
Input voltage range: + 10 dBu max
Headphone connector: > 100mW (32Ohm)
Operating voltage (stand alone): 12 V DC nom.
Dimensions (Transmitter): 212 x 145 x 38 mm
Weight (Transmitter): 1100 g
Audio-Output-Power: 100 mW (32Ohm)
Audio-XLR connector: 3,5mm jack
Operating voltage (stand alone): 2x 1,5V AA
Operating time: 6-10 h
Dimensions (Receiver): 82 x 64 x 24 mm
Weight (Receiver): 170 g