Nikon SB-R200 Wireless Speedlight

Nikon Updated: 2007-06-19
Nikon SB-R200 Wireless Speedlight

Compact and lightweight remote Speedlight Unit

Supports the Nikon Creative Lighting System (CLS) and compatible CLS cameras

Easy-to-set analog controls

Built-in target light and AF Illuminator allows for proper position of Speedlight on the subject as well as autofocus operation in low light situations

i-TTL Flash control for accurate flash exposures in close-up and other multiple lighting applications

Can be set to one of three Speedlight Groups (A,B and C)

Offers four independent channels for competitive shooting environments

Integrates perfectly into multiple flash situations including the SB800 and SB-600 Speedlight units

Electronic construction: Wireless remote flash unit with Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry

Angle of coverage:  78 degrees horizontal, 60 degrees vertical

Guide number:  10/33 (ISO 100, m/ft.), 14/46 (ISO 200, m/ft.)

Flash modes:  i-TTL, D-TTL, TTL (film-based cameras), M (manual)

Recycling time:  6 seconds or less

Bounce capability:  Flash head tilts down (toward optical axis) to 60 degrees with stops at every 15 degrees, and up (away from optical axis) to 45 degrees with stops at every 15 degrees

Number of flashes:  Approximately 290

Flash duration:  Approximately 600 micro-seconds

Mounting foot:  Dedicated shoe for SX-1 Attachment Ring or AS-20 Speedlight Stand

Power source:  One 3V CR123A lithium battery

Dimensions:  Approximately 80 x 75x 55 mm (3.1 x 3.0 x 2.2 inches)