Nikon R1 Wireless Close-Up Speedlight System

Nikon Updated: 2007-06-19
Nikon R1 Wireless Close-Up Speedlight System

Enables superb close-up lighting control with exceptional flexibility and innovative options

For use with use with Nikon i-TTL SLRs with built-in Speedlights with Commander mode including D200, D70S and D70

Wireless control convenience

Built-in Speedlight of D200, D70s or D70 serves as system's Master controller.

Producing desired close-up lighting effects is straightforward and uncomplicated

Features and includes two SB-R200 Speedlights

Up to three remote Groups and four Channels consisting of two SB-R200 Wireless Remote Speedlights can be arranged to enable creative lighting from the left, right, above or below the subject

SB-R200 Wireless Remote Speedlights can be tilted up to 60 degrees to accommodate lenses with short working distances

Flash compensation or Flash ratio control for desired lighting effects

SX-1 Master Attachment Ring accommodates up to eight SB-R200 Speedlights (off-camera), up to four (on camera)

SB-800 and/or SB-600 Speedlights can be combined and controlled for additional creative lighting effects

Auto FP High-Speed Sync available (with compatible cameras)

Supplied as a complete ready-to-use system. In addition to above, system also includes 52mm, 62mm, 67mm,72mm and 77mm mounting rings to accommodate most AF Nikkor lenses, AS-20 Speedlight Stands, SJ-2 ColorFilter Set, SW-C1 Flexible Arm Clip, SW-11 Extreme Close up Positioning Adapter, SW-12 Diffusers, fittedStorage Case and more. SU-800 Wireless Speedlight Commander available separately, providing compatibilitywith Nikon i-TTL SLRs without built-in Speedlights including D2X, D2HS, D2H and F6. SU-800 Wireless Speedlight Commanderprovides additional functionality with SB-800 and SB-600 Speedlights.

Complete Outfit Includes:  (2) SB-R200 Wireless Remote Speedlights; SX-1 Attachment Ring; SS-MS1 Close-Up Speedlight Kit Case; (2) SS-R200 Soft Case; SS-SX1 Soft Case; SG-31R IR Panel for Built-In Flash; SW-C1 Flexible Arm Clip; (2) SW-11 Extreme Close- Up Positioning Adapter; SW-12 Diffuser; SY-1-52 52mm Adapter Ring; SY-1-62 62mm Adapter Ring; SY-1-67 67mm Adapter Ring; SY-1-72 72mm Adapter Ring; SY-1-77 77mm Adapter Ring

SB-R200 Specifications Listed Below:

Electronic construction:  Wireless remote flash unit with Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry

Guide number: 10/33 (ISO 100, m/ft.), 14/46 (ISO 200, m/ft.)

Angle of coverage:  (78 degrees horizontal, 60 degrees vertical)

Flash modes:  i-TTL, D-TTL, TTL (film-based cameras), M (manual)

Recycling time:  6 seconds or less

Number of flashes:  Approximately 290

Bounce capability:  Flash head tilts down (toward optical axis) to 60 degrees with stops at every 15 degrees, and up (away from optical axis) to 45 degrees with stops at every 15 degrees

Flash duration:  Approximately 600 micro-seconds

Mounting foot:  Dedicated shoe for SX-1 Attachment Ring or AS-20 Speedlight Stand

Target light:  White LED

Power source:  One 3V CR123A lithium battery

Dimensions (W x H x D):  Approximately 80 x 75 x 55 mm (3.1 x 3.0 x 2.2 inches)