JVC KY-F70BU SXGA Imaging Camera Less Lens

JVC Updated: 2008-04-07 RSS
JVC KY-F70BU SXGA Imaging Camera Less Lens

The industrial standard C-mount 1/2" 3-CCD digital color cameras shall be a JVC KY-F70BU or equivalent. The camera shall incorporate three 1/2" interline-transfer CCD pickup device with 1,450,000 (1,392 (H) x 1,040 (V)) effective pixels for separated R,G,B, and built-in Dichroic prism for accurate color separation with no optical distortions. The camera shall feature easy removable IR cut filter for various applications. The scanning system shall be progressive with 4:3 aspect ratio. The camera shall produce 1,360 x 1,024 pixel (1,000 TVL) horizontal and vertical resolution for sharp, accurate and noise free picture. The camera shall feature selectable gain levels from ISO100, 200, 400 to provide clear digital images in various light conditions. The camera shall deliver sharp digital images sensitivity of ISO100. The camera shall have user-friendly controls on rear panel for all of camera setting and remote control setting through SCSI-2 connection by provide control software. The control software shall operating under Windows operation systems. The camera shall feature preview window, color bar generator, color and B/W switching, Aspect ratio setting and all of camera settings. The camera synchronization shall be Hs/Vs, flash. The camera will feature Automatic Electronic Shutter (AES) which is equivalent to continuous variable shutter speed between 1/60 to 1/2000 second or allows for the use of manual mode and slow shutter mode from 1/30 to 1 second. The camera will feature Variable Scan mode between 1/60.3 to 1/2074.6, and SXGA quality of 5 frames digital memory. The camera shall feature of WEN, Freeze, H/V sync inputs. The camera output signal shall be analog RGB by 15-pin D-sub connector and Digital output by SCSI-2 connector. The camera shall produces 7.5 frames of 1,360 x 1,024 pixels or 60 frames of 640 x 480 pixels image through 15-pin D-sub connector. The camera shall feature RS-232 remote controls full function for camera. The camera shall feature built-in SCSI capture card for captures 1,360 x 1,024 pixels digital images and transfer through SCSI-2 connection to PC less than 6 seconds per image. Power source shall be DC 12V. The camera dimensions shall not exceed 3-3/16" H (without base) x 2-13/16" W x 5015/16" D. The unit shall be UL listed and IEC 601-1 medical approval.

* SXGA Picture Resolution 1,360 x 1,024
* Effective 4.35 million square-pixel on-chip progressive-scan CCD with 1.45 million effective pixels for each color
* Live color preview (VGA) for speed, ease and accuracy
* 1/2 inch C-mount to fit on wide variety of lenses and scopes
* 3-CCD block with color separation prism
* 1,360 x 1,024 pixel (1,000-TV line) horizontal and vertical resolution
* SCSI-2 interface allows direct digital transfer to PC, and direct control of printer or storage media.
* TWAIN driver software for capturing included, plus RS-232C camera control software available, allowing easy shooting from PC. 32-bit Windows 98 version already available.
* Built-in 32-bit RISC CPU for faster memory control response
* Combination with additional PC capture boards realizes fast access (processing) to PC.
* Up to 3 m umbilical SCSI-2 cord from PC to final termination
* External trigger with flash synchronization
* Picture frames are stored in uncompressed TIFF form to prevent degradation.
* Automatic Video Level adjustment
* IEC 601-1 approval for medical use (with AA-P700)
* Four uncompressed SXGA images may be stored in the internal Frame Memory.
* Camera set-up is carried out by on-screen menus which cater for wide range of applications.