JVC KY-F32U 3-CCD General Purpose Camera Less Lens

JVC Updated: 2008-04-07 RSS
JVC KY-F32U 3-CCD General Purpose Camera Less Lens

The industrial standard bayonet mount 1/2" 3-CCD color DSP cameras shall be a JVC KY-F32U or equivalent. The camera shall incorporate three 1/2" interline-transfer CCD pickup device with 380,000 (768 (H) x 494 (V)) effective pixels for separated R,G,B, and built-in F1.4 optical prism for accurate color separation with no optical distortions. The scanning system shall be 2:1 interlaced. The camera shall produce a horizontal resolution of 750 TV lines and a signal to noise ratio of 60dB for sharp, accurate and noise free picture. The camera shall feature an Automatic Gain Control (AGC) circuit or selectable gain levels to provide clear images in various light conditions. The camera shall deliver a sharp color picture sensitivity of F9.5 at 2000 Lux or a scene illumination of 6 Lux at F1.4 with 100% of video level. The camera shall feature 3 dimension detect Automatic Tracking White balance for accurate color reproduction between 2,900 to 8,000¡K of color temperature or Manual adjustment for flexible operation in a wide range of environments. The camera shall have user-friendly on-screen set up for adjustment of H. phase, SC coarse, Iris detection, shutter speed, Pedestal level, Gamma, Contour, camera ID, and manual white balance. The camera synchronization shall be internal or external by Composite video or Black Burst signal. The camera will feature Automatic Electronic Shutter (AES) which is equivalent to continuous variable shutter speed between 1/60 to 1/2000 second and allows for the use of manual mode. The camera will feature Variable Scan mode between 1/60.3 to 1/2074.6, Frame integration mode, Negative video function, and built-in color bar generator. The camera output signal shall be composite (BNC / 9-pin D-sub), Y/C, RGB, and Component by 9-pin D-sub connector. The camera shall feature optional remote control by wired or RS-232 that controls full function of camera. Power source shall be DC12V with lock-in din connector. The cameraÕs dimensions shall not exceed 3-3/16 H (without base) x 2-13/16" W x 6-1/2" D. The unit shall be UL listed.

* Standard 1/2" bayonet mount
* 750 horizontal lines resolution with a high sensitivity of F 9.5 at 2,000 lux and minimum illumination of 6.0 lux
* Memory function
* Comprehensive input and output terminals
* High-Resolution Frame Integration Mode boosts vertical resolution to 480 lines
* Negative video function
* Full-time automatic operation
* Menu setup control from camera head and RS-232C