Panasonic EY7840LN2S 14.4V SDS Plus Rotary Hammer

Panasonic Updated: 2009-03-11 RSS
Panasonic EY7840LN2S 14.4V SDS Plus Rotary Hammer

Panasonics EY7840LN2S 14.4V SDS Plus Rotary Hammer is a versatile tool built powerful and tough in a compact lightweight frame, focused on delivering continuous drilling into concrete, brick and block.

The EY7840LN2S has two modes, hammer mode and drill mode.  In the hammer mode the EY7840LN2S drills concrete with a speed of 0 -1,000 rpm and a maximum of 4,000 blows per minute with a hitting force of 21.6 Kn.  In the drill mode the EY7840LN2S delivers a speed of 0-1,000 rpm for drilling and fastening into wood and metal. The EY7840LN2S features a 5 stage clutch that delivers 13 48 in.lbs. of torque in 9 in. lbs. increments. The convenient SDS bit adaptor allows you to fasten in concrete, wood and metal.  The chuck is a 5/8 capacity SDS-plus bit system utilizing a push to insert bit style with a one touch bit release for easy bit insertion and removal.  The EY7840LN2S features a new air-coupling hammer mechanism for quick hole drilling into concrete.  The air system hammer uses compressed air to drive the piston and deliver power effectively.  This high-quality, versatile tool is ideal for installation, mechanical, electrical, and maintenance work.

The EY7840LN2S offers a full complement of convenience features including an LED Work Light that illuminates the work area when in use and an attachable shoulder strap for when both hands are in use.  The EY7840LN2S is compact in size (9 long) and weighs only 5.1 lbs.  The ergonomic design delivers a comfortable contoured rubber grip which allows for less fatigue over extended use. The convenient location of the variable speed control trigger and forward/reverse switch permits one hand operation. The lightweight design makes this tool ideal for overhead work  During overhead work its dust proof trigger prevents fine particles of dust from entering the tool and causing problems with the switch  or motor.

The EY7840LN2S is powered by a 3.0ah Cobalt Li-ion battery pack. This battery pack delivers high output with low heat generation resulting in twice the lifetime total performance versus current Ni-Cd battery packs. In addition the EY7840LN2S utilizes Panasonics unique GuardION system.  The GuardION system monitors each battery cell during battery charging and during tool use to prevent over discharging and overheating of the battery pack thus insuring long life.

The EY7840LN2S uses a self diagnostic universal battery charger which electronically monitors the condition of each cell in the battery pack during the charging process to deliver full charging with minimal heat generation. The 3.0ah Li-ion battery pack included in the kit fully charges in 50 minutes. The charger will charge all Panasonic battery chemistries Ni-Cd, Ni-MH, Li-ion and all voltages from 7.2-28.8v.  The kit comes with a tool, 2 3.0ah Li-ion battery packs, a universal charger, and a molded case.

Specifications

Compact Size: Length 9 51/64"
Lightweight: 5.1lbs
Blows Per Minute: 0 - 4,000bpm
Battery: High Capacity 3.0Ah Li-ion Cobalt battery pack
Extra battery: Included
Clutch: 5 Stage
Chuck: 1/2" SDS Plus
Ergonomics: Ergonomic design to reduce fatigue
Dual Function: Rotary Hammer or Drill
Switch: Slow start dust proof switch for accuate drilling with a clean finish
Hammer Mechanism: New air-coupling hammer mechanism for quick hole drilling into concrete
Variable Speed: Yes
Acceptable Battery Packs: Panasonic 14.4V Li-ion Battery Pack (EY9L40B)
Typical Applications: Instillation, Mechanical, Electrical, Maintenance
LED Work Light: Yes
GuardION Battery Protection System: Yes
Carrying Case: Yes
Speed at no load: 0 - 1,000rpm
Hammering Force: 21.6Kn
Available Formats: EY7840LN2S, EY7840X
Dimensions (H x W x D): 10 3/64"'' x 9 51/64"'' x 2 33/64"''
Weight: 5.1 lbs

Copyright 2011 GeneralManual.Com. All Rights Reserved. Products and names mentioned are the property of their respective owners. Privacy Policy RSS
This page is part of GeneralManual.Com Network Panasonic EY7840LN2S 14.4V SDS Plus Rotary Hammer User Manual.