Panasonic EY7202GQW Impact Tool

Panasonic Updated: 2007-06-26
Panasonic EY7202GQW Impact Tool

The Panasonic Cordless Power Tool Difference
To meet the needs of professional tradesmen around the globe, all Panasonic Cordless Power Tools are carefully constructed based on four primary principles: cordless capability, power, lightweight, and ergonomic design. Since our tools are all cordless, they can be used almost anywhere the professional requires. Our inverter charger technology used in our Ni-MH battery charging system allows for long battery pack life and quick re-charging time. Plus, there's no compromise in power-our tools provide more than enough punch using motors with high-power magnets, heat resistant brushes and built-in cooling fans. For your comfort, the advanced ergonomic design of our tools means they're compact, well-balanced and easy to operate for extended periods of time without fatigue. Successfully combining technology with durability, these lightweight tools are full of helpful features and provide reliable solutions that tradesmen can utilize for all their construction needs.

Advanced Digital Clutch Technology
Have you ever experienced trouble like damaging the material or snapping the head off a screw and had to redo the work? New digital clutch technology automatically stops before over tightening even when the switch is still being pulled. Clutch operation is digitally controlled to match working conditions using a sensor and microcomputer. You set the digital clutch stage (16 stages) and press the tighten button, which will stop after the screw has been tightened about one-half rotation. This makes fine flush alignment quick and easy to do, even at high power. Better yet, the new digital clutch eliminates the need for the user to perform fine speed control, and thereby reduces mistakes from over tightening.

Power Mode Switching
High torque delivers for faster tightening but makes it harder to leave a clean finish. With this tool, you can switch between three torque levels, hard mode, medium mode and soft mode. Hard mode offers approximately 1,060 in.lbs of torque for fastening large diameter bolt and nuts and lag bolts. Soft mode gives you approximately 530 in.lbs to reduce material surface damage and avoid stripping screw heads.

Advanced Ergonomic Design

Spot Lighting for Screwing in Dark Areas
A white LED light with a condenser lens makes it easy to see when you are working in a dark place. The light is powered by the battery pack and linked to the trigger switch to prevent it from being left on.

Hands-Free Convenience
The smart hook can be extended to hook the tool to your belt. This allows you to have both hands free while moving around. The hook can be connected on the right or left side of the tool.

Reduce Damage and Help Prevent Sliding
The rubber guards protect the tool and material surface from damage when laid on its side as well as helping prevent slipping and dropping. The urethane cover protects the tool if dropped, and also suppresses heat transmission from the motor.

Less Time Spent Waiting and More Time Spent Working
The 3.5Ah Ni-MH battery can be fully charged in 55 minutes (using the EY0110B charger), which means less time spent waiting and more time spent working. Even when there isn't time for a full charge, the inverter charger features a 5-minute "Emergency Charge" that charges the pack to 15% of its capacity.

Compact Size  6-9/16" x 9-1/4" x 2-9/32" (LxHxW)
Lightweight  4.1 lbs.
High Power  Hard mode: 1060 in.lbs.
Medium mode: 970 in.lbs.
Soft mode: 530 in.lbs.
Battery  High capacity 3.5Ah Ni-MH
Extra battery  Included
Charging System  55 minute (using EY0110B charger)
Speeds  Hard mode: 0-2,600 rpm
Medium mode: 0-2,450 rpm
Soft mode: 0-2,000 rpm
Clutch  16-stage DIGITAL clutch with auto shut off
Chuck  1/4" Hex drive
Reversible  Yes
Electric Brake  Yes
Ergonomics  Advanced ergonomic design with Anti-slip ribbed grip and balanced tool weight
Acceptable Battery Packs  Panasonic 12V
Typical Applications  Air Conditioning Installation, Automotive Repair and Maintenance, Scaffolding Assembly, Long Wood Screw/Lag Screw Fastening
LED Work Light  White LED light with a condenser lens makes it easy to work in a dark area
Smart Hook  Yes, hook can be extended to hook the tool on your belt
Dimensions (H x W x D)  9.25'' x 2.28'' x 6.56''
Weight  4.1 lbs