Kenwood Excelon X600F 4-Channel Power Amplifier

Kenwood Updated: 2009-04-19 RSS
Kenwood Excelon X600F 4-Channel Power Amplifier

The Japanese kanji characters symbolize "powerfulness". It is a character that stands for rigidity and strength. The X600F delivers clear, balanced musical reproduction thanks to Kenwood's exclusive K-STAT output transistors which are specially designed for music playback.

General Features
* Powerful Amplifier Series
* Class AB 4-Ch Amplifier
* K-STAT Output Circuit
* Detachable Aluminum Dress Plate
* Power MOS-FET Switching Power Supply
* Cast Aluminum Heat Sink Design
* Dual Cooling Fans
* Hexagon Screw Type Terminal Blocks
* Single-Side Exposure Of Terminals For Multi-Installation
* Line Output Terminals For Extension
* CEA-2006 Compliant
* 2-Year Warranty

Power MOSFET
In the power stage, MOSFETs, (metal oxide semiconductor field effect transistors) are arranged in a 2-parallel push-pull configuration. The resulting increase in driver control enables driving high or low impedance loads with ease. Better Sound Quality & Higher Output!

K-STAT™ Self-Tracking Audio transistor
Many amplifiers have higher distortion when they first power up as it takes time for the amp to reach optimal operating temperature. K-STAT™ is a specialized audio technology developed by Kenwood that uses a transistor with a built-in biasing circuit to ensure the amplifier adjusts accordingly based on any change in temperature. This new design results in lower distortion so when the amp powers up, and at full power, distortion is reduced. It also reduces thermal resistance but increases power for improved sound quality.

Variable High Pass Filter
The built-in variable HPF makes it possible to select the crossover frequency and remove low frequencies from component or coaxial speakers.

Variable Low Pass Filter
The built-in variable LPF allows the user to select a variable frequency and remove damaging high frequencies from the subwoofer pathway for more bass output with less distortion.

Specifications
RATED OUTPUT POWER (14.4V):
* 100W RMS x 4 @ 4Ω
* (20Hz-20kHz @ 0.05%THD)
* 150W RMS x 4 @ 2Ω
* (1kHz @ 0.5% THD)
* 300W RMS x 2 @ 2Ω (Bridged)
* (1kHz @ 0.5% THD)

* RMS POWER OUTPUT (CEA-2006)
* 100W RMS x 4
* (RMS @ 4Ω, 1% THD+N)
* 85dBa Signal-To-Noise Ratio

BUILT-IN CROSSOVER CONTROL:
* Variable High-Pass Filter: 50Hz-200Hz (-12dB/oct)
* Variable Low-Pass Filter: 50Hz-200Hz (-12dB/oct)

TERMINALS:
* Battery: Hex Type (4 AWG)
* Ground: Hex Type (4 AWG)
* Speaker: Hex Type (8 AWG)

* Operating Voltage: 14.4V
* Current Consumption: 64A
* S/N Ratio: 105dB
* Frequency Response: 5Hz-50kHz
* Input Sensitivity: 0.2V ~ 5.0V

Installation Size:
* Width: 14-15/16" (380mm)
* Height: 2-5/8" (66mm)
* Depth: 11-1/4" (286mm)
* Weight: 10.8 lbs. (4.9Kg)

Copyright 2011 GeneralManual.Com. All Rights Reserved. Products and names mentioned are the property of their respective owners. Privacy Policy RSS
This page is part of GeneralManual.Com Network Kenwood Excelon X600F 4-Channel Power Amplifier User Manual.