JBL PX300.4 4-Channel Power Amplifier

JBL Updated: 2008-09-14 RSS
JBL PX300.4 4-Channel Power Amplifier

The PX300.4 is an ideal choice if you are looking to deliver great power to your front and rear speakers. This amplifier was developed with sonic accuracy in mind delivering ultra-low distortion and exceptional channel separation.

The PX300.4 comes equipped with a slope selectable electronic crossover capable of setting the slope rate at 12dB or 24dB per octave. The additional adjustment will allow you to maximize output power and finely tune the system response to your vehicle.

Dynamic Bass Optimization (DBO) - The rear two channels of the PX300.4 includes DBO which provides variable filtering with adjustable "Q" below 100Hz, far beyond conventional "Bass Q" circuits, by allowing the low-frequency output to be optimized for specific subwoofer applications. Frequencies below an enclosure's tuning frequency can be attenuated, preventing damage to the subwoofer and allowing the amplifier's power to be better utilized.

Full-range preamp outputs - In the event that multiple amplifiers are used in an application, this feature allows for streamlined system hookup. No high-loss Y-adapters or splitteres needed.

SPECIFICATIONS

Warranty: 1 Year
General
Power Output: 123.5 watts RMS x 4 channels at 4 ohms and ≤ 1% THD + N
358 watts RMS x 2 channels at 4 ohms, 14.4V supply and ≤ 1% THD + N
Signal-to-Noise Ratio: 76.64 dBA (reference 1 watt into 4 ohms)
Dynamic Power: 194 watts at 4 ohms
Effective Damping Factor: 6.383 at 4 ohms
Frequency Response: 16.6Hz – 500kHz (-3dB)
Maximum Input Signal: 5.9 V
Maximum Sensitivity: 250 mV
Output Regulation: .39 dB at 4 ohms
Dimensions (H x W x D): 2-9/16" x 17" x 12-1/4"