Panasonic BL-WV10A TV Adaptor

Panasonic Updated: 2007-06-28

Easy to Set Up and Watch on TV
Just connect the video cable to a TV to watch the camera images and control up to 8 cameras. You can set up the network cameras where you want, and even access cameras from across the internet.

Change the Camera Direction by Remote Control!
You can move the camera lens in the direction you want to see by pressing the cursor key on the remote control or even access your favorite angles by using the preset controls (numbers 1-8). This simple remote control lets you operate the camera right from the TV, without having to move the camera by hand.

Human Detection Sensor
The built-in sensor can detect the presence of people and large animals, which can trigger the camera to record images or send an email of the captured image(s) to your computer or cell phone.

Warning Buzzer Informs You When Activity is Detected
Each camera can utilize either a built-in sensor (BL-C10A/BL-C30A) or a commercially available external sensor to detect activity. When the sensor is triggered, a buzzer sound notifies anyone who is near the TV adaptor.

Easily Record Camera Images
By inserting an SD Memory Card into the unit, the camera images can be recorded onto the card. The recorded images can then be displayed on the TV by remote control operation.

Interface LAN: Ethernet (10Base-T/100Base-TX) x 4 ports
Video output terminal (composite NTSC)
SD Card Slot
Supported Protocols IPv4
TCP, UDP, HTTP, FTP, DHCP
Resolution 320 x 240, 640 x 480
Image Quality 3 settings (favor clarity, standard, favor motion)
Image Encoding System JPEG, MotionJPEG
Frame Rate Max. 15 frames/sec (320 x 240)
Security User ID and password required for monitoring
Power Source AC Adaptor 12V DC
Supplied Voltage 12V
Camera Connection and Display Up to 8 cameras can be connected and displayed
Displays output in single-screen 8-page mode, or 4-screen, 2-page mode
Remote Control Operation Yes, all connected cameras can be remote-controlled
Camera View Modes Sequential switching
Sensor-activated switching (BL-C10 and Bl-C30 only)
Manual switching
Network Settings On-screen setting
Setting items: IP address, subnet address, gateway, DNS server 1, DNS server 2
SD Card Yes
SD Card Functions Still and moving image recording and playback
Setting for sensor-activated and timer recording
Wireless Technology IEEE802.11g and IEEE802.11b
Frequency bandwidth 2412 to 2484 MHz
Channel OFDM Yes (Orthogonal Frequency Division Multiplexing system)
Transmission system IEEE802.11g: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps
IEEE802.11b: 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
Transmission speed Automatic fallback
Repeater Yes
Access Point Yes
Wireless Security WEP (64/128/152 bits)
ESSID ANY access denial (setting required)
ESSID non-transmission within beacon (setting required)
No-response function for probe request (setting required)