Yamaha RX-V392 Natural Sound AV Receiver

YAMAHA Updated: 2007-10-08
Yamaha RX-V392 Natural Sound AV Receiver

5-CHANNEL HOME THEATER RECEIVER WITH DOLBY PRO LOGIC AND CINEMA DSP
The RX-V392 is a 5-channel receiver providing superb Pro Logic performance and processing and Yamaha's Digital Sound Field Processing, and Cinema DSP.

DISCRETE POWER TRANSISTORS
Discrete power transistors rather than IC chips are used in the amplifier section to provide the cleanest sound possible. The amp delivers 50 watts each to the three front channels and 20 watts each to the rear surround channels.

ACCLAIMED YAMAHA IC CHIPS
Yamaha's acclaimed YSS-203 chip provides Digital Pro Logic with full channel separation and no front-to-back bleedthrough as well as 35mm Cinema DSP.

8 DSP/CINEMA DSP PROGRAMS -- INCLUDING 35mm MOVIE THEATER CINEMA DSP
Yamaha's exclusive Digital Sound Field Processing for music recreates the acoustic personalities of actual concert halls and other venues, such as the Roxy Theater in Los Angeles, Village Gate in New York, Anaheim Stadium, and concert halls and churches in Europe. 35mm Cinema DSP multiplies the effects of Dolby Pro Logic and Yamaha DSP to provide the best possible Pro Logic movie theater recreation in your home.

PRE-OUTS FOR CENTER CHANNEL AND SUBWOOFER
The center channel and subwoofer have pre-out connections. This allows you to add outboard amplification to the center channel and direct subwoofer connection.

DUAL CENTER CHANNEL OUTPUTS
You can easily add a second center channel speaker. This is especially convenient for large-room systems or for those using a big screen or projection TV.

THREE AUDIO AND TWO VIDEO INPUTS
The RX-V392 is a versatile receiver incorporating three sets of audio-only inputs and two pairs of A/V inputs.

YAMAHA SYSTEM REMOTE CONTROL
Ergonomically designed "paddle" remote control keypad allows you to control other Yamaha components, such as CD players, cassette decks, tuners, etc. from the remote control transmitter included with the receiver.

LOW IMPEDANCE DRIVE CAPABILITY AND IMPEDANCE SWITCHING
Yamaha's famed low impedance drive circuitry is included in this receiver so that it can handle virtually all loads and a wide variety of speakers. For further speaker matching, the amplifier can be set for either 4- or 8-ohm speakers.

LINEAR DAMPING FACTOR CIRCUIT
The advantage of full range, 20 Hz - 20 kHz, damping is that it improves the definition and resolution of the sound output throughout the audible frequency range.

40-STATION DIRECT ACCESS PRESET TUNING
Up to 40 preset AM and FM stations can be grouped in five groups of eight stations. These groupings make it easy for family members to easily access their favorite stations or to have musical genres, such as all the jazz stations, grouped together.

SLEEP TIMER
Switches unit off, after up to two hours of play in :30 minute increments.

A/B SPEAKER SELECTOR
Allows use of one or both sets of speakers.

BINDING POST SPEAKER TERMINALS
Yamaha's heavy-duty binding post speaker terminals accept banana plugs, spade connectors, and a variety of speaker wire, including heavy gauge cable.