Pioneer VSW-1 Automatic Video Switcher

Pioneer Updated: 2008-05-09 RSS
Pioneer VSW-1 Automatic Video Switcher

The VSW-1 is simple in its design and extremely easy to use, ensuring that DVJs are able to mix audio/video content from separate sources without relying upon multiple independent devices or needing another artist in the DVJ booth.

This Video Switcher gives performers more freedom in the mix because they can automatically switch video sources (by pressing the red "Auto" button) when using the familiar Fader Start capability found in all of Pioneer's Pro DJ mixers.

The VSW-1 video switcher gives top DVJs the flexibility they need to take full advantage of Pioneer's revolutionary DVJ-X1.

General specifications

Power: AC110-120 V / 220 - 240 V
Power consumption: 9 W
Operating temperature: + 5C° to + 35C°
Operating humidity: 5 -85 % R.H. (without precipitation)
Weight: 1.4 kg
External dimensions (W x D x H): 25 x 9 x 8.6 cm
Video input section (input level/impedance)
Component video BNC connectors x 3 (2 systems): Y: 1 Vp-p / 75 Ohm
CB/PB: 0.7 Vp-p / 75 Ohm
CR/PR: 0.7 Vp-p / 75 Ohm
S-Video S connector (2 systems): Y: 1 Vp-p / 75 Ohm
C: 0.286 Vp-p / 75 Ohm
Composite vide RCA connector (2 systems): 1 Vp-p / 75 Ohm
Video output section (output level/impedance)
Component vide BNC connectors x 3 (1 system): Y: 1 Vp-p / 75 Ohm
CB/PB: 0.7 Vp-p / 75 Ohm
CR/PR: 0.7 Vp-p / 75 Ohm
S-Vide S connector (1 system): Y: 1 Vp-p / 75 Ohm
C: 0.286 Vp-p / 75 Ohm
Composite vide RCA connector (1 system): 1 Vp-p / 75 Ohm
Sync signal output section
Sync output: BNC connector (2 systems): 1 Vp-p / 75 Ohm
Supported video modulation systems: NTSC/PAL
Other connectors
Control input: minijack (3.5 dia) 2 systems
Control output: minijack (3.5 dia) 2 systems